Cgs synth

so,
in readin' through the steiner vcf article i see, "The 10k and 22k
resistors in the input and output buffers should be matched 1%
metal film for best results." there are two 10k resistors listed in
the schematic an' only one listed in the parts list. there are no
22k resistors listed. i do however recognise this quote from the
ASR article. is it an errant quote? or does it actually apply to the
vcf???
thanks,
doc

Whoops! - an errant paragraph!

Ken

>so,
>in readin' through the steiner vcf article i see, "The 10k and 22k
>resistors in the input and output buffers should be matched 1%
>metal film for best results." there are two 10k resistors listed in
>the schematic an' only one listed in the parts list. there are no
>22k resistors listed. i do however recognise this quote from the
>ASR article. is it an errant quote? or does it actually apply to the
>vcf???
>thanks,
>doc
>
>
>
>
>See the following URLS for the CGS Modular Synth home page:
>Main: http://www.cgs.synth.net/
>Secondary: http://otherunicorn.0catch.com/synth/
>To unsubscribe from this group, send an email to:
>cgs_synth-unsubscribe@yahoogroups.com
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>