Cgs synth

My Cynare has a very low volume output when I use the VCF, changing the R-Gain resistor from 10K to 1K gives me a more desired volume output.

For those who know what they are doing, can this cause any problems in the circuit, thanks.

Chris



[Non-text portions of this message have been removed]

That will give you 10 times the signal strength. If it isn't distorting, you
are fine. In otherwords, if it sounds okay, it is okay.

Ken

thanks ken

----- Original Message -----
From: sasami@...
To: cgs_synth@yahoogroups.com
Sent: Sunday, November 05, 2006 2:39 AM
Subject: Re: [cgs_synth] Cynare VCF Volume question


That will give you 10 times the signal strength. If it isn't distorting, you
are fine. In otherwords, if it sounds okay, it is okay.

Ken

>My Cynare has a very low volume output when I use the VCF, changing the
R-Gain resistor from 10K to 1K gives me a more desired volume output.
>
>For those who know what they are doing, can this cause any problems in the
circuit, thanks.
>
>Chris
>
>
>
>[Non-text portions of this message have been removed]
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>
>
__________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>





[Non-text portions of this message have been removed]