Synth-DIY Yahoo! Groups Archives

Thread

CGS114 DUSG PCB and Schematic don't match?

2012-06-15 by jonbstevens

Hi,

Populating my DUSG boards tonight and I noticed in the schematic the 150k resistor connected to the DC OUT (the one close to the LED), is labelled 47k on the PCB.

There's also no 150k resistors in the parts list. So am I correct in following the PCB? or the schematic? Thanks!

Jonathon

Re: CGS114 DUSG PCB and Schematic don't match?

2012-06-15 by sasami@hotkey.net.au

it only controls LED brightness/response. If you don't like the behavior,
try the other value. Honestly, I cannot remember anything about that.

Ken

Show quoted textHide quoted text

>Hi,
>
>Populating my DUSG boards tonight and I noticed in the schematic the 150k

resistor connected to the DC OUT (the one close to the LED), is labelled 47k
on the PCB.

>
>There's also no 150k resistors in the parts list. So am I correct in

following the PCB? or the schematic? Thanks!

>
>Jonathon
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>

_______________________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

Re: CGS114 DUSG PCB and Schematic don't match?

2012-06-15 by jonbstevens@hotmail.com

Makes sense, thanks Ken!
Jonathon

To: cgs_synth@yahoogroups.com
From: sasami@...
Date: Fri, 15 Jun 2012 11:45:18 +0000
Subject: Re: [cgs_synth] CGS114 DUSG PCB and Schematic don't match?

it only controls LED brightness/response. If you don't like the behavior,

try the other value. Honestly, I cannot remember anything about that.

Ken

Show quoted textHide quoted text

>Hi,

>

>Populating my DUSG boards tonight and I noticed in the schematic the 150k

resistor connected to the DC OUT (the one close to the LED), is labelled 47k

on the PCB.

>

>There's also no 150k resistors in the parts list. So am I correct in

following the PCB? or the schematic? Thanks!

>

>Jonathon

>

>

>

>------------------------------------

>

>The CGS Modular Synth home page: http://www.cgs.synth.net/

>Yahoo! Groups Links

>

>

>

>

__________________________________________________________

Ken Stone sasami@... otherunicorn@...

Modular Synth PCBs for sale <http://www.cgs.synth.net/>

Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

[Non-text portions of this message have been removed]

Cgs synth

CGS114 DUSG PCB and Schematic don't match?

CGS114 DUSG PCB and Schematic don't match?

Re: CGS114 DUSG PCB and Schematic don't match?

Re: CGS114 DUSG PCB and Schematic don't match?

Move to quarantaine