Yahoo Groups archive

Cgs synth

Index last updated: 2026-04-28 23:16 UTC

Thread

CGS82 Serge Negative Slew

Re: CGS82 Serge Negative Slew

2012-07-18 by sasami@hotkey.net.au

Try swapping your chips between the sections and see if the fault stays, or
follows the chips. If it follows the chips, you have a failed chip. I had a
bad chip in my prototype that stumped me for a while. Apart from that, it
worked fine.

Ken
Show quoted textHide quoted text
>Any one built this yet ? i have one populated but it isn't working. one led
lights up and stays on while the other does not.
>
>Meter just reads a constant voltage
>
>the silicon used:
>CA3046, lm3900 and bc547
>pcb
>http://www.coa-modular.com/wp-content/uploads/2012/07/pcbnegslew.jpg
>
>panel
>http://www.coa-modular.com/wp-content/uploads/2012/07/wirednegslew.jpg
>
>thanks
>d
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>
_______________________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.