CGS59 Programmer/Sequencer Voltage output increase??
2013-04-13 by Adam Scramstad
Hi all,
Is it possible to mod the CGS59 A/B to allow a 0-10V output?
Cheers!
- Adam
Is it possible to mod the CGS59 A/B to allow a 0-10V output?
Cheers!
- Adam
Thread
CGS59 Programmer/Sequencer Voltage output increase??
Re: CGS59 Programmer/Sequencer Voltage output increase??
2013-04-13 by cg_synth
CV - To double the output replace the 100k resistors between each inverter
pair with 47k (or solder another 100k in parallel). Other resistor values
here will give you different gains. I'm not sure what the max output is at
the moment!
Gate - Replace 820R near Pulse Out with 100R. Replace 680R with 1k. (do on
each channel)
pair with 47k (or solder another 100k in parallel). Other resistor values
here will give you different gains. I'm not sure what the max output is at
the moment!
Gate - Replace 820R near Pulse Out with 100R. Replace 680R with 1k. (do on
each channel)
Show quoted textHide quoted text
>Hi all,_______________________________________________________________________
>
>Is it possible to mod the CGS59 A/B to allow a 0-10V output?
>
>Cheers!
>
>- Adam
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
Re: CGS59 Programmer/Sequencer Voltage output increase??
2013-04-13 by cg_synth
*Worked out on a bit of paper. Try it on one channel before you modify them
all! Sorry, but I really don't feel like ripping the sequencer out of my
synth again!
all! Sorry, but I really don't feel like ripping the sequencer out of my
synth again!
Show quoted textHide quoted text
>CV - To double the output replace the 100k resistors between each inverter_______________________________________________________________________
>pair with 47k (or solder another 100k in parallel). Other resistor values
>here will give you different gains. I'm not sure what the max output is at
>the moment!
>
>Gate - Replace 820R near Pulse Out with 100R. Replace 680R with 1k. (do on
>each channel)
>
>>Hi all,
>>
>>Is it possible to mod the CGS59 A/B to allow a 0-10V output?
>>
>>Cheers!
>>
>>- Adam
>>
>>
>>------------------------------------
>>
>>The CGS Modular Synth home page: http://www.cgs.synth.net/
>>Yahoo! Groups Links
>>
>>
>>
>>
>_______________________________________________________________________
>Ken Stone sasami@... otherunicorn@...
>Modular Synth PCBs for sale <http://www.cgs.synth.net/>
>Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
Re: CGS59 Programmer/Sequencer Voltage output increase??
2013-04-13 by Adam Scramstad
Thanks Ken! I'll try these tips out this weekend, and report my results.
Cheers,
- Adam
Cheers,
- Adam
Show quoted textHide quoted text
On Apr 13, 2013, at 2:04 AM, sasami@... wrote:
> *Worked out on a bit of paper. Try it on one channel before you modify them
> all! Sorry, but I really don't feel like ripping the sequencer out of my
> synth again!
>
> >CV - To double the output replace the 100k resistors between each inverter
> >pair with 47k (or solder another 100k in parallel). Other resistor values
> >here will give you different gains. I'm not sure what the max output is at
> >the moment!
> >
> >Gate - Replace 820R near Pulse Out with 100R. Replace 680R with 1k. (do on
> >each channel)
> >
> >>Hi all,
> >>
> >>Is it possible to mod the CGS59 A/B to allow a 0-10V output?
> >>
> >>Cheers!
> >>
> >>- Adam
> >>
> >>
> >>------------------------------------
> >>
> >>The CGS Modular Synth home page: http://www.cgs.synth.net/
> >>Yahoo! Groups Links
> >>
> >>
> >>
> >>
> >__________________________________________________________
> >Ken Stone sasami@... otherunicorn@...
> >Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> >Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
> >
> >
> >
> >------------------------------------
> >
> >The CGS Modular Synth home page: http://www.cgs.synth.net/
> >Yahoo! Groups Links
> >
> >
> >
> >
> __________________________________________________________
> Ken Stone sasami@... otherunicorn@...
> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>
>
[Non-text portions of this message have been removed]