VC DIVIDER banana jack wiring
2013-07-28 by tojpeters
Can I change the pull-up resistor from 1K to 100K rather than a switched jack for banana jack CV input? Or do I need to use a separate switch?
Thread
VC DIVIDER banana jack wiring
Re: VC DIVIDER banana jack wiring
2013-07-28 by cg_synth
I think if you go to 100k you will limit the range of the pot too much when
there is nothing plugged in. I try it with a 22k pull up.
Ken
there is nothing plugged in. I try it with a 22k pull up.
Ken
Show quoted textHide quoted text
>Can I change the pull-up resistor from 1K to 100K rather than a switchedjack for banana jack CV input? Or do I need to use a separate switch?
>_______________________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Re: VC DIVIDER banana jack wiring
2013-07-29 by tojpeters
This is for a BOG panel. Would you recommend the 22k or just using a push-pull pot in place of the normalized jack? Thanks for your reply.
Show quoted textHide quoted text
--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>
> I think if you go to 100k you will limit the range of the pot too much when
> there is nothing plugged in. I try it with a 22k pull up.
>
> Ken
>
> >Can I change the pull-up resistor from 1K to 100K rather than a switched
> jack for banana jack CV input? Or do I need to use a separate switch?
> >
> _______________________________________________________________________
> Ken Stone sasami@... otherunicorn@...
> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
>
Re: VC DIVIDER banana jack wiring
2013-07-29 by cg_synth
It would probably be an idea to ask on the best of CGS build thread over on
muffwigglers to see what others have done.
Ken
muffwigglers to see what others have done.
Ken
Show quoted textHide quoted text
>This is for a BOG panel. Would you recommend the 22k or just using apush-pull pot in place of the normalized jack? Thanks for your reply.
>_______________________________________________________________________
>--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>>
>> I think if you go to 100k you will limit the range of the pot too much when
>> there is nothing plugged in. I try it with a 22k pull up.
>>
>> Ken
>>
>> >Can I change the pull-up resistor from 1K to 100K rather than a switched
>> jack for banana jack CV input? Or do I need to use a separate switch?
>> >
>> _______________________________________________________________________
>> Ken Stone sasami@... otherunicorn@...
>> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
>>
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Re: VC DIVIDER banana jack wiring
2013-07-30 by tojpeters
Ok,thanks. Doesn't seem like many people have actually built any yet. People are still waiting for panels. I got mine used from someone who abandoned their build. working on the swamp panel now. waiting for a mouser order for those inevitable last few bits not in my stock.
Show quoted textHide quoted text
--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>
> It would probably be an idea to ask on the best of CGS build thread over on
> muffwigglers to see what others have done.
>
> Ken
>
> >This is for a BOG panel. Would you recommend the 22k or just using a
> push-pull pot in place of the normalized jack? Thanks for your reply.
> >
> >--- In cgs_synth@yahoogroups.com, sasami@ wrote:
> >>
> >> I think if you go to 100k you will limit the range of the pot too much when
> >> there is nothing plugged in. I try it with a 22k pull up.
> >>
> >> Ken
> >>
> >> >Can I change the pull-up resistor from 1K to 100K rather than a switched
> >> jack for banana jack CV input? Or do I need to use a separate switch?
> >> >
> >> _______________________________________________________________________
> >> Ken Stone sasami@ otherunicorn@
> >> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> >>
> >
> >
> >
> >------------------------------------
> >
> >The CGS Modular Synth home page: http://www.cgs.synth.net/
> >Yahoo! Groups Links
> >
> >
> >
> >
> _______________________________________________________________________
> Ken Stone sasami@... otherunicorn@...
> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
>
Re: VC DIVIDER banana jack wiring
2013-07-31 by Dmitri SFC
I built one, it works fine without any switch, mine has a 100k in line
with the wiper of the VC pot
d
--
<http://www.facebook.com/dmitri.sfc>
[Non-text portions of this message have been removed]
with the wiper of the VC pot
d
--
<http://www.facebook.com/dmitri.sfc>
[Non-text portions of this message have been removed]