Synth-DIY Yahoo! Groups Archives

DC Mixer caps?

2004-06-01 by data2action

Putting together a joystick controller using a pair of DC Mixers. On
the schemos (and old board), the power supply iso caps are 10uf
electrolytics; but on the PC board it sez 100n and no polarity
markings. Can I use the smaller value?

bob

Re: DC Mixer caps?

2004-06-01 by sasami@hotkey.net.au

You certainly can use the 100n caps (0.1uF MKT or ceramic). They're actually
better at HF noise suppression than the 10uF could ever hope to be.

Ken

Show quoted textHide quoted text

>Putting together a joystick controller using a pair of DC Mixers. On
>the schemos (and old board), the power supply iso caps are 10uf
>electrolytics; but on the PC board it sez 100n and no polarity
>markings. Can I use the smaller value?
>
>bob
>
>
>
>
>See the following URLS for the CGS Modular Synth home page:
>Main: http://www.cgs.synth.net/
>Secondary: http://otherunicorn.0catch.com/synth/
>Yahoo! Groups Links
>
>
>
>
>
>

_______________________________________________________________________
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

Cgs synth

DC Mixer caps?

DC Mixer caps?

Re: DC Mixer caps?

Move to quarantaine