Cgs synth

>I'm ready to put the 4 LF356 into the ASR. Unfortunately I'm not sure
>which pin is which. I know where pin 8 is but, looking at the data
>sheet, I'm not positive if I'm looking at a bottom view or top view
>of the can. Seeing that the 4 cost me $10 I'm a little apprehensive
>to guess. Should the pins be in the same places as plastic dip silk
>screen shows ? Firgured I should ask someone who knows.
>
>Thanks,
>P.
>
>
>
>
>See the following URLS for the CGS Modular Synth home page:
>Main: http://www.cgs.synth.net/
>Secondary: http://otherunicorn.0catch.com/synth/
>Yahoo! Groups Links
>
>
>
>
>
>

--- In cgs_synth@yahoogroups.com, "peng3002" <peng3002@y...> wrote:
> I'm ready to put the 4 LF356 into the ASR. Unfortunately I'm not sure
> which pin is which. I know where pin 8 is but, looking at the data
> sheet, I'm not positive if I'm looking at a bottom view or top view
> of the can. Seeing that the 4 cost me $10 I'm a little apprehensive
> to guess. Should the pins be in the same places as plastic dip silk
> screen shows ? Firgured I should ask someone who knows.
>
> Thanks,
> P.

On Fri, 13 Aug 2004, Larry T. wrote:

> For everyone looking for parts and for part specifications, I have
> found a VERY interesting site: http://www.findchips.com
>
> It lets you find availability and sometimes pricing, Also generally
> one of the suppliers listed will have a link to the part spec sheets.
> Kills a lot of birds with one stone. I noted from the LF356 search
> that DigiKey had the TO-8 part (LF356H) for $2.68, and was able to get
> the product spec sheet from National Semi using the link to the part
> at DigiKey. Even if your not buying, it's a neat tool to get to part
> spec sheets.
>
> Larry
>
> --- In cgs_synth@yahoogroups.com, "peng3002" <peng3002@y...> wrote:
> > I'm ready to put the 4 LF356 into the ASR. Unfortunately I'm not sure
> > which pin is which. I know where pin 8 is but, looking at the data
> > sheet, I'm not positive if I'm looking at a bottom view or top view
> > of the can. Seeing that the 4 cost me $10 I'm a little apprehensive
> > to guess. Should the pins be in the same places as plastic dip silk
> > screen shows ? Firgured I should ask someone who knows.
> >
> > Thanks,
> > P.
>
>
>
>
> See the following URLS for the CGS Modular Synth home page:
> Main: http://www.cgs.synth.net/
> Secondary: http://otherunicorn.0catch.com/synth/
> Yahoo! Groups Links
>
>
>
>
>