Rhodes Chroma Polaris

Hi DavidHi Paul ,Yhank You for Great Advice .I'll look after for rev 11 zipped firmware and "burn" on 4 Eproms.
Ciao
 


    On Friday, December 4, 2015 6:42 AM, "'Paul D. DeRocco' pderocco@... [chromapolaris]" <chromapolaris@yahoogroups.com> wrote:
 

     > From: David Clarke
> 
> The EPROM firmware images are available free-of-charge from 
> the Rhodes 
> Chroma site (Polaris sub-section) here:
> 
> http://www.rhodeschroma.com/?id=polariseproms
> 
> As long as you have the files any local tech or person with an EPROM 
> burner would be able to prepare the chips for you.

Back on 11/22/2014, I sent Chris a later version, in zip form, which I
still don't see on the site. The last version I had developed at Fender
was actually rev 10, but it had a tiny bug in it which I recently fixed,
and bumped it up to rev 11. If it wasn't received, I can send it again.

As to the differences between 9 and 10, I don't have a clear record of
that, but I believe I added experimental support for a faster processor
that used a 24MHz crystal. I don't think there are any functional or tonal
differences.

-- 

Ciao, Paul D. DeRocco
Paul mailto:pderocco@...