If you do LF-Diags-12-Stop, it wipes out everything Lower Function - D (Diagnostics) - 12, STOP / Erases all RAM and resets the microprocessor. Everything in RAM is wiped out; all adjustments, programs, and sequences. The Polaris must be reloaded and all factory adjustments must be performed following this particular function. Generally, this should be used whenever EPROM'S are changed to a different revision. Below is the reference for the commands http://www.rhodeschroma.com/?id=polarisservicediagnostics ----- Original Message ----- From: "yarreau@... [chromapolaris]" <chromapolaris@yahoogroups.com> To: chromapolaris@yahoogroups.com Date: Mon, 10 Oct 2016 15:11 -0400 Subject: [chromapolaris] Hard Reset > > Will I still be able to hear and program sounds after a hard reset (Lower/Diag/12)? or does that just remove the stored sounds? > > Bill > >
Message
Re: [chromapolaris] Hard Reset
2016-10-10 by David Gowin