> From: dmxkrew@... > > Got my Polaris almost perfect now. > > However, one of the 6 voices is slightly quieter than the others. > > I have done the volume calibration correctly so that each > voice responds to envelopes identically in terms of > attack/release times.... but one voice is just a bit quiet. > > Is there a trimmer for this somewhere? No trim for this. If you don't have a scope, you could poke around with an audio probe (an audio input that has a fairly high impedance) and see where in the chain it appears. You could use a voltmeter to check the VCA control signal with a scratch patch selected. And you could try swapping ICs with another channel to see if the problem moves. But ultimately, you'll have to fix whatever is broken. -- Ciao, Paul D. DeRocco Paul mailto:pderocco@...
Message
RE: [chromapolaris] One voice too quiet
2017-05-31 by Paul D. DeRocco