Rhodes Chroma Polaris

> From: Ryan Freer
> 
> Also...(you may already know this.) Before you mess with the 
> RAM chips, be sure you have a reliable backup of everything 
> in memory, or you could lose it. If for some reason you need 
> to re-seat any of the chips, you'll need to disconnect the 
> battery backup cable from the J15 jumper so that power isn't 
> being sent to your RAM while you pry it out. 

I wasn't suggesting removing the chips, just dislodging them a millimeter or
so. In general, this is something that you can do even with the power on,
although it's wise to turn the main power off just in case the screwdriver
slips. And you might as well do it with the power off because afterwards
you'll have to cycle the power anyway to see if it boots.

-- 

Ciao,               Paul D. DeRocco
Paul                mailto:pderocco@ix.netcom.com