Rhodes Chroma Polaris

> 
> Hi folks,
>     Thank you for all the support I have seen in this group. I am an original polaris owner. Sometime in the years since I bought it one of the 1/4 in jacks broke, it was plastic, likely to keep it isolated from the case. it is missing that broken jack now. I can most likely find a replacement. Can someone supply me with a couple of close up pics of the inside of the polaris chassis around where the output jacks are to give me a visual on what wires go where? My schematic reading skills are minimal. A visual aid would help tremendously. I Did conquer the front panel workaround and this issue is all that is left from my having once again, a functioning chroma polaris!
> Thanks in advance,
> Bill
> 
> Wherever you go, there you are.
> 
> 
>

>
>
>Hi folks,
>    Thank you for all the support I have seen in this group. I am an original 
>polaris owner. Sometime in the years since I bought it one of the 1/4 in jacks 
>broke, it was plastic, likely to keep it isolated from the case. it is missing 
>that broken jack now. I can most likely find a replacement. Can someone supply 
>me with a couple of close up pics of the inside of the polaris chassis around 
>where the output jacks are to give me a visual on what wires go where? My 
>schematic reading skills are minimal. A visual aid would help tremendously. I 
>Did conquer the front panel workaround and this issue is all that is left from 
>my having once again, a functioning chroma polaris!
>Thanks in advance,
>Bill
>
>Wherever you go, there you are.
>
>
>
>

From: Yahoo Mail <sukhoy27@...>
>To: chromapolaris@yahoogroups.com
>Sent: Tue, January 29, 2013 5:08:15 AM
>Subject: Re:  [chromapolaris] close up pic [1 Attachment]
>
>Hi ,
>I had same problem, and substitute the High Output jacks with insulated Mono 
>Jack with internal contacts Normally closed, 
>as you can see in the schematics extract, eclosed in this email.
>The Low Output and the Headphones output are also insulated type.
>
>
>Best wishes
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>Il giorno 29/gen/2013, alle ore 03:15, Bill Deaux <yarreau@...> ha 
>scritto:
>
>  
>>
>>
>>Hi folks,
>>    Thank you for all the support I have seen in this group. I am an original 
>>polaris owner. Sometime in the years since I bought it one of the 1/4 in jacks 
>>broke, it was plastic, likely to keep it isolated from the case. it is missing 
>>that broken jack now. I can most likely find a replacement. Can someone supply 
>>me with a couple of close up pics of the inside of the polaris chassis around 
>>where the output jacks are to give me a visual on what wires go where? My 
>>schematic reading skills are minimal. A visual aid would help tremendously. I 
>>Did conquer the front panel workaround and this issue is all that is left from 
>>my having once again, a functioning chroma polaris!
>>Thanks in advance,
>>Bill
>>
>>Wherever you go, there you are.
>>
>>
>>
>>
>
>
>

From: Yahoo Mail <sukhoy27@...>
To: chromapolaris@yahoogroups.com
Sent: Sat, February 2, 2013 4:53:51 PM
Subject: Re: [chromapolaris] close up pic

I understand ,

I changed the old Type Jack with new one more stronger.

If you want I can email a photo of these new jack, and cabling .

ciao

Il giorno 29/gen/2013, alle ore 14:29, Bill Deaux <yarreau@...t> ha scritto:

thanks for the type of jack, I have the schematic already though, I was looking for an actual photo taken of that part of the inside chassis where the jacks are so I can match the wiring :)
Bill

Wherever you go, there you are.

From: Yahoo Mail <sukhoy27@...>
To: chromapolaris@yahoogroups.com
Sent: Tue, January 29, 2013 5:08:15 AM
Subject: Re: [chromapolaris] close up pic [1 Attachment]

Hi ,

I had same problem, and substitute the High Output jacks with insulated Mono Jack with internal contacts Normally closed,

as you can see in the schematics extract, eclosed in this email.

The Low Output and the Headphones output are also insulated type.

Best wishes

Il giorno 29/gen/2013, alle ore 03:15, Bill Deaux <yarreau@...> ha scritto:

Hi folks,
Thank you for all the support I have seen in this group. I am an original polaris owner. Sometime in the years since I bought it one of the 1/4 in jacks broke, it was plastic, likely to keep it isolated from the case. it is missing that broken jack now. I can most likely find a replacement. Can someone supply me with a couple of close up pics of the inside of the polaris chassis around where the output jacks are to give me a visual on what wires go where? My schematic reading skills are minimal. A visual aid would help tremendously. I Did conquer the front panel workaround and this issue is all that is left from my having once again, a functioning chroma polaris!
Thanks in advance,
Bill

Wherever you go, there you are.