Crumar Musical Instruments User Group.

--- In crumar@yahoogroups.com, Justin Maxwell <soc@...> wrote:
>
> Thanks, Michael!  Can anyone share the schematics that were floating  
> around here last month?
> 
> On Mar 16, 2007, at 8:52 AM, Michael Ashton wrote:
> 
> > Almost certainly a decoupling cap -- I forget exactly where they  
> > are but I replaced all six on my Bit 01. Recommend you do the same  
> > --mpa
>


Hi. I would be interested to hear that sound example ( http://code404.com/CrumarProblems.mp3 ) but it's not there anymore..

I have Crumar Bit-01 with one dead or more like very silent voice. It's also third one so if that Justins Bit-01 ever got repaired i would be gratefull of any advice what to do with it.

What i have done so far is that i tried to swap filter chips to different slots to see if it has any effect -it did not. Nothing changed.

I made many tests like one as example when i removed all filter chips except first. Then of course it had only one working sound.
After that i replaced that 1st. chip with the one from slot 3. It worked perfectly again as one voice synth like it should of course. I found out that way that all chips were working a OK.

I still did not trust my self and bought one from EBAY. It also worked but did not fix 3rd. voice problem.

Then i bought few LM13700N chips (they were cheap at least) and replaced all three -again with no anykind of effect on problem.

I have TL082 chips too but somehow i suspect that replacing those is useless as well.

Could you or anyone give a clue what capacitors could have this effect or if it is wise to replace them all?

Someone on another forum suggested that idea. Said that it removed doubts that some other cap would fry also soon after replacing faulty one -and that replacing them all would also made soundquality better.. .  .

Before i start to randomly replace those caps i thought that i ask from this forum if somebody would know exactly what this all about.

.a33e