Crumar Musical Instruments User Group.

>
> Hi Crumar community,
> 
> At the moment i'm restoring my Crumar Bit One...so new caps for all the boards, 
> new tantalums, slider cleaning and replacing, keyboard contacts cleaning etcetera.
> So while i'm doing this i required an extra control surface board for the Bit One but i don't need 
> all the components. So i want to offer these to the community.
> What have i got:
> 
> One complete set of switch caps containig 8x caps with a hole for the led, 3x normal cap and the numeric caps
> going from 0 till 9.
> 
> All the push buttons including 8x push button with led glider/leader and 13x the normal push buttons.
> 
> The numeric led display pcb complete with mounting material. (Crumar P 1102) 
> 
> I've got four sliders (3x 5kb = upper and lower and detune and 1x 20kb = noise) left 
> but only two can be made functional since two are broken off. I can switch the internals though.
> 
> And offcourse the control pcb which still contains the noise circuit and the transistors for the led display.
> 
> If anyone is in need in some of this material just answer in this thread. 
> The stuff is located in Purmerend, Holland, Europe and i don't use Paypal.
> 
> Thanks for your time and all the best Dennis
> 
> 
> P.S. I've made pictures of the progress on my Bit One. I'll put them in the photo section when i'm done. Also a detailed
> photoshoot on how to clean the keyboard.
>

>
> Hi Crumar community,
> 
> At the moment i'm restoring my Crumar Bit One...so new caps for all the boards, 
> new tantalums, slider cleaning and replacing, keyboard contacts cleaning etcetera.
> So while i'm doing this i required an extra control surface board for the Bit One but i don't need 
> all the components. So i want to offer these to the community.
> What have i got:
> 
> One complete set of switch caps containig 8x caps with a hole for the led, 3x normal cap and the numeric caps
> going from 0 till 9.
> 
> All the push buttons including 8x push button with led glider/leader and 13x the normal push buttons.
> 
> The numeric led display pcb complete with mounting material. (Crumar P 1102) 
> 
> I've got four sliders (3x 5kb = upper and lower and detune and 1x 20kb = noise) left 
> but only two can be made functional since two are broken off. I can switch the internals though.
> 
> And offcourse the control pcb which still contains the noise circuit and the transistors for the led display.
> 
> If anyone is in need in some of this material just answer in this thread. 
> The stuff is located in Purmerend, Holland, Europe and i don't use Paypal.
> 
> Thanks for your time and all the best Dennis
> 
> 
> P.S. I've made pictures of the progress on my Bit One. I'll put them in the photo section when i'm done. Also a detailed
> photoshoot on how to clean the keyboard.
>

>
> i would really need one black slider cap (that small plastic part). it's the only thing that i miss to get my bit one fully fixed. 
> 
> + maybe that one ribbon calble.. 
> 
> --- In crumar@yahoogroups.com, "DenDer" <denderdj@> wrote:
> >
> > Hi Crumar community,
> > 
> > At the moment i'm restoring my Crumar Bit One...so new caps for all the boards, 
> > new tantalums, slider cleaning and replacing, keyboard contacts cleaning etcetera.
> > So while i'm doing this i required an extra control surface board for the Bit One but i don't need 
> > all the components. So i want to offer these to the community.
> > What have i got:
> > 
> > One complete set of switch caps containig 8x caps with a hole for the led, 3x normal cap and the numeric caps
> > going from 0 till 9.
> > 
> > All the push buttons including 8x push button with led glider/leader and 13x the normal push buttons.
> > 
> > The numeric led display pcb complete with mounting material. (Crumar P 1102) 
> > 
> > I've got four sliders (3x 5kb = upper and lower and detune and 1x 20kb = noise) left 
> > but only two can be made functional since two are broken off. I can switch the internals though.
> > 
> > And offcourse the control pcb which still contains the noise circuit and the transistors for the led display.
> > 
> > If anyone is in need in some of this material just answer in this thread. 
> > The stuff is located in Purmerend, Holland, Europe and i don't use Paypal.
> > 
> > Thanks for your time and all the best Dennis
> > 
> > 
> > P.S. I've made pictures of the progress on my Bit One. I'll put them in the photo section when i'm done. Also a detailed
> > photoshoot on how to clean the keyboard.
> >
>