Yahoo Groups archive

Datacolor User to User Support Group.

Index last updated: 2026-04-28 23:18 UTC

Message

Re: Problem with average

2006-10-01 by bwinkjet

Hi Mike,

I had the same problem several weeks ago with a series of three 
readings of 729 patchs.  Never knew for sure why, but after I reread 
the first and last patches of each of the three readings I could see 
them for the first time in the tool drop down, average.

Paul

--- In colorvision_group@yahoogroups.com, "Mike Johnson" 
<mikejohnson@...> wrote:
>
> I did that.
> 
> The only difference are, the first time I generated a profile, the 
second
> time I did not, and it was a day later.
> 
> The only differences I can see in the files are the numbers in 
<Fingerprint>
> are different, and <RefWhite> <RefBlack> were extreme values.
> 
> I can open the file on the "Read Patches" page, but I can't even 
see it in
> the averages dialog box.
> 
> Mike
> 
>   -----Original Message-----
>   From: colorvision_group@yahoogroups.com
> [mailto:colorvision_group@yahoogroups.com]On Behalf Of Walt Mucha
>   Sent: 01 October 2006 16:39
>   To: colorvision_group@yahoogroups.com
>   Subject: Re: [colorvision_group] Problem with average
> 
> 
>   When you measure a target for a 2nd time you have to do it just 
like you
> are doing a completely new target. Do not select an existing 
measurment set
> and give it a new name. Doing that caused me the same problem.
> 
>   Walt
> 
>   http://www.kauaiphotos.biz
> 
>   >-----Original Message-----
>   >From: Mike Johnson [mailto:mikejohnson@...]
>   >Sent: Sunday, October 1, 2006 01:03 AM
>   >To: colorvision_group@yahoogroups.com
>   >Subject: [colorvision_group] Problem with average
>   >
>   >I'm trying to average two 225 sets, but I can't see the 2nd file.
>   >
>   >I've tried renaming it, and I've compared the files in wordpad, 
and all
>   >the readings seem to be there. There is some small differences 
in the
>   >values taken yesterday and today so I would like to average them.
>   >
>   >Yesteday this worked fine on 2 different sets of data. Is there
>   >something in the file that stops it being listed ?
>   >
>   >I'm using Windows XP and PrintFix PRO 1.1.1
>   >
>   >
>   >
>   >
>   >
>   >
>   >
>   >
>   >Yahoo! Groups Links
>   >
>   >
>   >
>   >
>   >
>   >
>   >
>   >
>   >
>   >
>   >
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.