Datacolor User to User Support Group.

David, removing ColorNavigator from the Startup list plus using the DataColor profile chooser to reassociate the DataColor created profile with the Eizo monitor worked. Thanks for your (normal) great support.

As an FYI, a profile created by the Eizo ColorNavigator had become associated with the monitor and the Sypder3 utility was attempting to load it and failing. 

Rollin

--- In datacolor_group@yahoogroups.com, Cdtobie <CDTobie@...> wrote:
>
> Using the method you describe should be fine, but it requires removing the Color Navigator start up item, so that it does not conflict with the Spyder3 Utility. 
> 
> C. David Tobie
> Global Product Technology Manager
> Imaging Color Solutions
> Datacolor inc. 
> cdtobie@...
> www.datacolor.com
> 
> On Sep 3, 2011, at 3:05 PM, "Rollin H" <rhill3@...> wrote:
> 
> > I have a Win 7, 64 bit system with dual monitors each installed on its own graphics card. One monitor is a Dell U2410 and the other is an Eizo CG222W. I have adjusted the Dell using the monitor controls and the Eizo using the utility provided by Eizo which uses the Spyder3 as the measuring device. I then ran the Spyder3 Pro software to build a profile for each monitor. 
> > 
> > When I boot, the Sypder3 software attempts to load the profiles to the LUT and the one for the U2410 monitor loads but the one for the CG222W gets and error indicating it could not be loaded.
> > 
> > Any ideas on what is happening and what I need to do? Is it possible that The Spyder3 software and the Eizo ColorNavigator are in conflict? If so, then is there a way to have the Spyder3 software support one monitor but not the other? The monitor looks good after using the Eizo ColorNavigator to set the values for brightness, contrast, color, etc.
> > 
> >
>