Datacolor User to User Support Group.

I will try including a MacBeth color checker in the image, but I know
the colors are reproducible because I can do a localized color
correction of the problem hue and get a very very close match to the
soft proof on the monitor screen. So I know the color can be
reproduced more accurately, the profile is failing to do this.

Thanks for your thoughts.

Ken

--- In colorvision_group@yahoogroups.com, CorrPro96@... wrote:
>
>  
> In a message dated 2/18/2007 9:10:36 A.M. Eastern Standard Time,  
> prof_mgt551@... writes:
> 
> If I  didn't do the color critical artwork reproductions for artist and
> only did  my landscape work, I would be very satisfied. Perhaps what I
> am seeing are  limitations in the PrinFix Pro/ SpyderII Pro calibration
> profiling system  and I need to consider an alternative. 
> 
> 
> 
> 
> You might be trying to do the impossible. To be sure, include a color  
> checker in your photo of the artwork.
> If your profile prints the color checker correctly and the artwork
hues are  
> still off, you'll know that your profile is correct and the hues are
not  
> reproduceable by the inkjet process. Sometimes the numbers are
simply not  there.

>  
> Richard (Brooklyn)
>