Yahoo Groups archive

Disklavier

Index last updated: 2026-04-28 23:20 UTC

Message

Re: [disklavier] Anyone getting WIFI working via a USB wifi adapter

2013-07-11 by Adrian Thomas

AFAIK, the USB ports on Disklaviers are only for connecting media devices. For networking, any device you use (WiFi, mains network, etc) needs to be connected to the ethernet LAN port.

Adrian Thomas

On Jul 9 2013, Kevin Weng wrote:

>Thanks Geoff. However that is not quite I asked. I tried USB midi connected
>to computer before so I understand what you were taking about.
>
>Instead, I am asking USB wifi adapter connected to the Internet.
>
>Kevin
>
>
>On Jul 8, 2013, at 7:52 PM, Geoff Ward wrote:
>
>
>
> See my post on June 27 2013 (reproduced below). This might be of interest
>to you.
>
>
>
>“An older DKV doesn’t need wireless capability to connect wirelessly to a
>laptop. It just needs a MIDI IN port (USB) to connect an IOGEAR wireless
>USB sharing station to. If it has no USB connectivity, then it will also
>need a USB to MIDI interface.
>
>The type of USB midi interface is important. The cheap ones from China
>(the ones with the treble clef symbol not ones with a symbol that looks a
>bit like a bass clef), which I have found to work very well for connecting
>to a MIDI instrument via USB do not seem to work with the wireless device
>from IOGEAR. The IOGEAR device asks for the driver for the USB interface
>(ie, as a piece of software that can be read). The Chinese USB interfaces
>that I have used come with a driver built in which installs on the computer
>when first connected. You will need a device that comes with its driver on
>a disk. An older Roland USB MIDI interface that I have comes with drivers
>on a disk. However, I have not tried it with the IOGEAR device – be
>aware. Here is a link to the IOGEAR USB sharing station
>http://www.iogear.com/product/GUWIP204/.”
>
>
>
>
> ------------------------------
>
>*From:* disklavier@yahoogroups.com [mailto:disklavier@yahoogroups.com] *On
>Behalf Of *kevinweng99
>*Sent:* Tuesday, 9 July 2013 9:22 AM
>*To:* disklavier@yahoogroups.com
>*Subject:* [disklavier] Anyone getting WIFI working via a USB wifi adapter
>
>
>
>
>
>I have connected the my disklaiver to internet successfully by using the
>recommended Ethernet adapter.
>
>However I wonder whether the USB port(instead of the Ethernet/LAN port) can
>be used to connect to WIFI? I do have an unused WIFE USB adapter. Will it
>work?
>
>BTW, is the USB for connect to a USB external hard drive? Anyone using a
>USB hub to allow multiple device?
>
>
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.