Yahoo Groups archive

Disklavier

Index last updated: 2026-04-28 23:20 UTC

Message

Re: [disklavier] DisklavierTV not working for me

2013-09-01 by Bill Brandom

Kevin, 

I am more than happy to get you up and running with DisklavierTV.

I will email you directly.

Bill

Sent from my iPhone.

On Aug 31, 2013, at 5:22 PM, Kevin Goroway <kgoroway@...> wrote:

I haven't tried yet, since there is already a dedicated PC next to my Disklavier.  I suppose I could try my laptop in there.  I'll give it a shot and report back tomorrow.

From: Gilbert Daniel Je <sdaniel@...>
To: "disklavier@yahoogroups.com" <disklavier@yahoogroups.com> 
Sent: Saturday, August 31, 2013 7:30 PM
Subject: Re: [disklavier] DisklavierTV not working for me

 
Kevin,

Didn't realize that was in the guide now!  When I beta tested it there was no mention of if.  Just out of curiosity, have you or can you try a different PC?

Gilbert

On Aug 31, 2013, at 6:01 PM, Kevin Goroway <kgoroway@yahoo.com> wrote:

>  
> I appreciate the response but I already tried that since it was in the setup guide...
> 
> Gilbert Daniel Je <sdaniel@samsoriginal.com> wrote:
> 
>  
> I had the same problem.  I fixed it by turning off all the 'enhancements' that my sound card had (Dell XPS laptop with sound blaster audio card).  Bass boost, aural expansion, range boost, etc.  I guess it modified the signal so much that the disklavier couldn't recognize it.
> 
> Hope this helps,
> 
> Gilbert Daniel, Jr.
> 
> Sent from my iPhone
> 
> On Aug 31, 2013, at 4:43 PM, <kgoroway@...> wrote:
> 
>>  
>> I finally got around to trying out DisklavierTV.  Updated my MarkIV to 4.2, updated the PRC, got the computer hooked up correctly, etc.
>> 
>> Video plays, I hear the audio, but my keys don't move (well, very very occasionally I'll catch one moving...).
>> 
>> I confirmed that audio seems to come over the left channel, and the right channel seems to include the encoded (sounds like static) information for the MIDI.  When I swap left and right channels, I can hear the static, so I know that the cable is fine.  The "static" is somewhat lower in volume then the audio, but I suspect that the piano ought to be able to understand it just fine...Any other troubleshooting tips?  I confirmed via Disklavier Radio that my keys do actually move when playing back MIDI (sometimes that stops working, and the piano needs a reboot).
>> 
>> Thanks.
>> -Kevin

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.