Disklavier

i have a baby grand GH1.  start the controller in maintenece mode from this start up you can advance to each board and show the version mumber without opening anything on the piano/  i have the steps for this at home i can check later.  i paid 1400 from yamaha but have seen them adverticed online for 450 or so .  thought that might be reasonable.  



-----Original Message-----
From: Dan Waxer <zed123@...>
To: disklavier <disklavier@yahoogroups.com>
Sent: Wed, Sep 25, 2013 12:08 am
Subject: Re: [disklavier] Mark II to Mark II xg



  
    
                  

Thank you so much for helping with this.
 
Can I ask, is your Mark ii a Grand, and if so, what model.
Mine is a DC7FII with a DKC100R controller box.
Is yours similar or the same?
 
And did you verify the version in the DKC100R Maintenance mode?  Or did you look on the board itself for a number?
Can I ask, what would you accept for your DKC500 please?
 
Thank you!
 
Dan
 
  
----- Original Message ----- 
  
From:   fracture 
  
To: disklavier@yahoogroups.com 
  
Sent: Sunday, September 22, 2013 4:16   PM
  
Subject: [disklavier] Mark II to Mark II   xg
  


  
The part number for the hammer circuit board is vt186900 and the 9 to 15   pin cable vz131700.  Don't have the part number for the Pk-ctl board.     Mine did not need to be replaced. 
  


  


  
  
Sent from my Samsung Galaxy   S®4