Disklavier

Dave

I had a problem with my mark 3 a few years back. When you wiggles the cable on the treble end do the red Light's come on and off ? A board had to be replaced as it was an intermittent connection problem.

Sent from my iPhone

> On 29 Jul 2017, at 21:31, daveproberts@... [disklavier] <disklavier@yahoogroups.com> wrote:
> 
> UPDATE:
> 
> I want to thank everyone for their help and advice on my problem. After one of the generous members of this group sent me his no-longer-needed Mark III controller, I plugged it in and experienced the same problem. Which, of course, made me realize the controller is not the problem.
> 
> It turns out that the cable connection from the piano to the controller has three prongs missing. That should have been the first thing I checked, but for some reason it never occurred to me. So the controller is receiving enough data from the remaining prongs to turn it on and operate some functions, but not enough to work data properly.
> 
> My question now is: How do I replace this cable? The other end goes into the amplifier. Is this a simple matter of opening up the amplifier housing, pulling out the bad cable and inserting a good one? Or is it more involved and I should hire a Disklavier technician or electrician?
> 
> Dave
>