Hi all
I am looking for some ideas regarding my PRC 100 controller. I currently have two of these that came with my piano both have problems.
The first one will boot up and work until I insert the wireless card then it freezes. I bought a replacement card however it still does the same thing so I am guessing its not the card.
The second boots and operates normally however it does not recognise the wireless card at all.
I am thinking I should try reloading the software including the operating system on both as a first step. Does anyone know where the software is available and how to proceed with this?
The other thought is to purchase a Sharp PDA 5000 and set it up as a controller. Has anyone done this and if so how did you do it?
I have a virtual version of the controller on my computer and it runs fine however it doesn't have all the functions of the original. If it were possible to get a full version to work on the PC I would dump the portable controllers all together as my computer and iPad cope with all the day to days beautifully.
Cheers
Darren
Message
Re: [disklavier] Mark IV PRC100
2017-08-10 by Dmitry
Hi Darren,
The OS and the upgrading process is described here - https://www.dropbox.com/s/iasi3hg8yinimpz/PRC100%20Operating%20system%20and%20instructions.zip?dl=0
It worked perfectly for me for a newly bought Sharp Zaurus SL-5600 - I think this is the right model as the one you mentioned has older CPU.
Hope this will help to you!
All the best,
Dmitry
On Thu, Aug 10, 2017 at 3:02 PM, darren.everitt@melbournefreelance.com [disklavier] <disklavier@...m> wrote: