Disklavier

Thanks George.

    Just to be cautious on my part, the E3/DKC-800 combination can play both Eseq(including PianoSoft Plus) as well as Midi Files.

Thank you.

From: 'George F. Litterst' PianoBench@... [disklavier] 
Sent: Sunday, January 7, 2018 11:24 PM
To: disklavier@yahoogroups.com 
Subject: Re: [disklavier] Upgrade to E3 Series Piano

  
Good evening, everyone. 


Ralph, the DKC-850 control unit is virtually indistinguishable from the DKC-800 control using that coms with the E3.

On the back of each box are 2 different sets of ports for connecting to the piano directly to the piano. The DKC-850 uses the serial port when connecting to Mark IIXG and Mark III pianos (thus replacing the original control unit). The DKC-800 uses the blue and green digital ports to connect to the E3. (Of course you have to use the MIDI ports when connecting the DKC-850 to Mark II and older Disklaviers.)

I don’t know if the DKC-850 and the DKC-800 are interchangeable. Regardless, the E3 comes with a DKC-800, and you won’t need the DKC-850 if you acquire an E3.

Regards,
PianoBench



  On Jan 6, 2018, at 12:23 PM, 'Ralph Specht' capespechts@... [disklavier] <disklavier@yahoogroups.com> wrote:


  About six months ago, I upgraded my 30 year old MX100 by adding the DKC-850.

  I transferred my old Floppy images to a USB drive and was really amazed at the changes to the piano and accompaniment with my home stereo system.

  Question:  If I decided to upgrade to the new E series piano, would I need to keep the DKC-850 in order to use the USB of my floppies, or is the DKC-850 redundant?

  I know that there were some comments on compatibility of the older Disklaviers going forward to the E series, and wanted to understand all the details.

  Thank you

  Ralph Specht