Turning a Disklavier on and off should have no effect on the feeling of the keys. However, turning the Silent Mode on and off could. When the Silent mode is turned on, the let-off, or escapement is sooner. That means the hammers starts back to rest at a greater distance before hitting the string. However, Yamaha has gone to great lengths in designing a special hammer jack that should alleviate this problem. Probably the single most common cause of heaviness of the keys in an upright piano is the balance hole adjustment of the key and the key bushings. The key pivots on the balance pin, like a see-saw, and often that hole is too tight. A good piano technician can fix this in about 20 minutes on an upright piano and about one hour or so on a grand piano. A special tool is inserted from the top of the key, and only the sides of this hole are eased. Perhaps the three different pianos your sister tried needed this adjustment. Most piano technicians will regulate a U1 piano without even thinking. Although the adjustment and procedure is identical for a piano equipped with a Disklavier, many piano technicians are reluctant to take the keys out and fix the problem. Perhaps this difference was the piano regulation and had nothing to do with the Disklavier. Carol Beigel >From: "bin_kuei" <bin_kuei@...> >Reply-To: disklavier@yahoogroups.com >To: disklavier@yahoogroups.com >Subject: [disklavier] Does Disklavier mechanism change the fell of the >action? >Date: Tue, 25 Jun 2002 00:07:22 -0000 > >I took my sister (who plays piano for 30+ years) to a very nice >dealership in the Bay Area to check out MPX1Z (48" upright Disklavier >with silent mode) and MX1Z (48" upright Disklavier w/o silent mode), >both based on the U1. She noticed the keys are stiffer when the >Disklavier control deck is powered on. The keys become stiffer and >she needed to labor more. Not expecting this, I did a blind test and >she always knows when the power was on. > >We also tested the U1 and it was free of the stiff, heavy feeling she >sensed. We went back and forth among the three and roughly concluded >the U1 has the "cleanest" action followed by MPX1Z (Disklavier off), >MX1Z (disklavier off), MPX1Z (Disklavier on) and MX1Z (Disklavier >on). The action feeling of the MX1Z was so stiff that she could not >recommend it. > >Are the pianos not properly set up? Can anybody shed some light on >what have we encountered? I do not play but did some research towards >our pending purchase. I know many people has mentioned the silent >mode changed the action due to a shank being moved in to block the >hammer. However, I do not recall any comments on the Disklavier >mechanism as a whole that changes the action feeling (for the worse) >vs. a U1. Should these Disklavier uprights based on the U1 play >differently than the U1 at all? Any Disklavier guru out there, >please help! > >Thanks, >Bin > _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com
Message
Re: [disklavier] Does Disklavier mechanism change the fell of the action?
2002-07-01 by Carol Beigel
Attachments
- No local attachments were found for this message.