Disklavier

You certainly have something peculiar going on.  The next step should be 
to try to discover if the problem is within the DKV or within Cubase and 
the computer. Do you have a friend with a different computer, sequencer, 
and cable that you could substitute for yours?  Or, can you borrow some 
simple synthesizer that you could substitute for the DKV?

Have you experimented with the MIDI input settings?

Contact me privately if you need a simple MIDI test file guaranteed to 
play on a Disklavier.

cdman1232001 wrote:
> Unfortunatly, the only midi cable connected was from the midi out of 
> the computer to the midi in of the disklavier so midi loopback 
> shouldnt be the problem. :(
> 
> Thx for responding :)
> Frank.
> 
> 
> 
> 
> 
> --- In disklavier@yahoogroups.com, Robert Welcyng <rwelcyng@a...> 
> wrote:
> 
>>You did not state whether you are connected to the Disklavier's 
> 
> MIDI 
> 
>>connectors or to the "To Host" connection.
>>
>>It sounds as though you are experiencing loopback.  Do you have two 
> 
> MIDI 
> 
>>cables connected between your Disklavier and computer?  If so, 
>>temporarily disconnect the MIDI cable from the "Out" connector at 
> 
> the 
> 
>>Disklavier.  If the chattering stops, loopback was the problem.
>>
>>Here is how loopback occurs:
>>
>>A. Your computer sends a MIDI messaage to the Disklavier's "In" 
> 
> connector.
> 
>>B. The Disklavier returns the same message to the computer.
>>
>>C. The computer returns the same message to the Disklavier, etc., 
> 
> etc.
> 
>>Check the documentation for Cubase.  You should be able to set that 
>>software to NOT send back received MIDI signals.  In Cakewalk, it 
> 
> is 
> 
>>called "Echo Mode".  If you are using the "To Host" connection, you 
> 
> can 
> 
>>stop the chattering only by killing the software's echo mode.
>>
>>I have had the same problem using Cakewalk.  When the program is 
>>launched, it is set by default with the "Echo Mode" in "Auto".  It 
> 
> needs 
> 
>>to be set to "None".  It was often catching me off guard and 
> 
> requiring 
> 
>>me to mouse through menus to turn it off. To preclude that problem, 
> 
> I 
> 
>>built a simple switchbox that allows me to open or close either of 
> 
> the 
> 
>>two MIDI lines.  Through forgetfulness, I still occasionally get 
>>chattering, but, to stop it, I need only reach over for the switch.
>>
>>As for getting a 20-second note, you have probably tried to use the 
>>sustain pedal to accomplish that and you may not wish to have all 
> 
> the 
> 
>>strings undamped.  That maximum note length function is surely 
> 
> buried in 
> 
>>a control program in ROM.  It is extremely unlikely that Yamaha 
> 
> would 
> 
>>share the code with you or burn a custom PROM.  In principle, 
> 
> through 
> 
>>reverse engineering, that probably could be done on your own at 
> 
> great 
> 
>>expense.
>>
>>
>>cdman1232001 wrote:
>>
>>>Hi everyone, here's my problem :
>>>I am triggering the piano from within a PC with Cubase, i am 
>>
> sending 
> 
>>>very little information at a time for example if i send only 1 
>>
> Note 
> 
>>>On (and velocity) and a sustain pedal down message (c64 127(i've 
>>>tried lower values like 95 to no avail)), the sustain pedal will 
>>>randomly start clanking very fast (i'm french for lack of a 
>>
> better 
> 
>>>word the analogy would be it sounds like someone that hits their 
>>>teeth very fast), sometimes it does it sometimes it doesnt you 
>>
> can 
> 
>>>hear the mechanical part sound when it's working right it's like 
>>
> a 
> 
>>>humm but as soon as the clanking begins you can't hear the 
>>
> sustain 
> 
>>>pedal mechanics anymore, if i look in the piano i can see the 
>>
> whole 
> 
>>>section that goes down when a sustain pedal goes down going up 
>>
> and 
> 
>>>down at a very high rate of speed about 2 times per second, it 
>>
> does 
> 
>>>it gently but still loud enough so that you can hear it.
>>>
>>>I've tried different midi configurations with same results, i'm 
>>>thinking this is mechanical and either part of or the motor 
>>>controlling the pedal is damaged or there's a problem with the 
>>>disklavier controler.
>>>
>>>Anyone ever get this problem, is there a special midi trick to 
>>
> this 
> 
>>>or is this purely mechanical ?
>>>
>>>also, is there any way around the 16 second note length lock on 
>>
> the 
> 
>>>piano ? i'd reall like to be able to get 20 seconds....
>>>
>>>Thx guys
>>>Franky.
>>>
>>>
>>>
>>>
>>>
>>>
>>>To Post a message to the group, send it to:   disklavier@Y...
>>>
>>>To Post a private message to Todd Muncy, the group's founder and 
>>
> moderator, send it to:
> 
>>>disklavier-owner@Y...
>>>
>>>To reach our group's web site go to:
>>>http://Yahoogroups.com/group/disklavier
>>>
>>>Todd's family web site was completely updated 01/15/03.  It 
>>
> contains some fun disklavier content and links to midi sites among 
> many other things, The url is:
> 
>>>http://MuncyFamily.com 
>>>
>>>THINKING OF LEAVING THE GROUP?
>>>If you are thinking of unsubcribing because you are getting too 
>>
> much mail, go the the web site and change your email delivery option 
> instead.  That will fix the problem, while maintaining your access to 
> the group.  If you insist on leaving us completely send a blank email 
> to:
> 
>>>disklavier-unsubscribe@y... 
>>>
>>>Know someone who wants to join?  Have them send a blank email to:
>>>disklavier-subscribe@e... or give them this link:
>>>http://Yahoogroups.com/group/disklavier/join 
>>> 
>>>
>>>Your use of Yahoo! Groups is subject to 
>>
> http://docs.yahoo.com/info/terms/ 
> 
>>>
>>>
>>
>>-- 
>>Robert Welcyng
>>Anchorage, Alaska
> 
> 
> 
> 
> To Post a message to the group, send it to:   disklavier@...
> 
> To Post a private message to Todd Muncy, the group's founder and moderator, send it to:
> disklavier-owner@...
> 
> To reach our group's web site go to:
> http://Yahoogroups.com/group/disklavier
> 
> Todd's family web site was completely updated 01/15/03.  It contains some fun disklavier content and links to midi sites among many other things, The url is:
> http://MuncyFamily.com 
> 
> THINKING OF LEAVING THE GROUP?
> If you are thinking of unsubcribing because you are getting too much mail, go the the web site and change your email delivery option instead.  That will fix the problem, while maintaining your access to the group.  If you insist on leaving us completely send a blank email to:
> disklavier-unsubscribe@... 
> 
> Know someone who wants to join?  Have them send a blank email to:
> disklavier-subscribe@... or give them this link:
> http://Yahoogroups.com/group/disklavier/join 
>  
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
> 
> 
> 


-- 
Robert Welcyng
Anchorage, Alaska