Robert: I believe I'd try a different tech and be sure to tell her/him your specific concerns. Try to choose a tech recommended by a satisfied customer.. The problem you described could be caused by a variety of simple-to-solve problems: basic tuning, uneven string level, warped hammer shanks, strike point, etc. Since you were happy with its sound two years ago, I doubt that a major re-voicing is order. If there are several hammers that are too hard or too soft, they can be needled or filed to restore a pleasant tone. As you have noted, a loose part can sometimes resonate and so can objects in the room such as baseboard heaters. Skilled techs are good at detecting and correcting such buzzing. rrl_edm wrote: >My Disklavier MX-1PE (Mark II XG Series) 48" upright is within a >week or so of its 2-year anniversary. I've been very satisfied with >the piano and hope to eventually set up to a Disklavier grand model, >perhaps a Mark IV. > >Since the piano arrived in my home in Dec 2003, I've had the Yamaha >recommended RPT over 4 or 5 times, including the Yamaha Service >Bond. Although the RPT tunes the piano and runs the Maintenance >Mode, he has never performed any voicing work. Is this normal? >Perhaps voicing isn't required on such a new piano? > >To my ear, I find a few notes in the lower end have a bit >of a "Boing", for lack of a better word. Also, I find that on a few >notes, that if held down, have a slight sitar like character that >kicks in after the initial sound of the hammer hitting the strings >subsides. That is, the after-tone seems a bit fuzzy as opposed to >being completely crisp and clear. Is this normal? Perhaps holding >down a key indefinitely is not a reasonable test? I've yet to visit >my dealer to give a few other pianos the same critical listening >tests. > >On a few occasions, I initially thought that maybe something was >slightly loose inside the Disklavier, but after taking the access >covers off and listening carefully, I've concluded this is not the >case. Also, I've verified nothing is loose. > >For some reason, overall, I find the piano doesn't sound quite as >good as it did in the first year. I can't explain why I feel this >way and it may simply be that my initial excitement has subsided >somewhat. Perhaps I'm only imagining this, or that the piano is now >simply settling in and taken on a slightly different character. >Then again, maybe a different tuner would deliver a different result >that fits better with my ear? > >To appreciate is that I'm very critical and these issues may be nit >picky. Also, this is the first acoustic piano I've owned and maybe >the issues I've encountered exist in all acoustic pianos. However, >should I consider trying another RPT? > >Robert > > > > > > > >To Post a message to the group, send it to: disklavier@... > >To Post a private message to Todd Muncy, the group's founder and moderator, send it to: >disklavier-owner@... > >To reach our group's web site go to: >http://Yahoogroups.com/group/disklavier > >Todd's family web site was completely updated 012/22/03. It contains some fun disklavier content and links to midi sites among many other things, The url is: >http://MuncyFamily.com > >THINKING OF LEAVING THE GROUP? >If you are thinking of unsubcribing because you are getting too much mail, go the the web site and change your email delivery option instead. That will fix the problem, while maintaining your access to the group. If you insist on leaving us completely send a blank email to: >disklavier-unsubscribe@... > >Know someone who wants to join? Have them send a blank email to: >disklavier-subscribe@... or give them this link: >http://Yahoogroups.com/group/disklavier/join > >Yahoo! Groups Links > > > > > > > > > -- Robert Welcyng Anchorage, Alaska
Message
Re: [disklavier] Disklavier Voicing??
2005-12-04 by Robert Welcyng
Attachments
- No local attachments were found for this message.