C O N G R A T U L A T I O N S ! and enjoy your new display.
It was money well spent and there could have been other problems internal to the old
display that you did not see. None of that matters now because it is new and
probably has a warranty!
Regards,
Mike
-----Original Message-----
From: yadidisklavier@...
To: disklavier@yahoogroups.com
Sent: Tue, 3 Apr 2007 6:40 PM
Subject: [disklavier] Re: MX100 II Main LCD Display Problem and Solution
My odyssey has finally come to end today.... I ponied up the $380
and had the display replaced by a technician. There was a capacitor
with some broken solder connections. I purchased the piano used
several months ago (everything worked). My theory is that during the
move (Piano Moving Inc.), the piano most likely was shaken and the
soldered joints simply broke. I think its important to note this
because I wouldn't want to give anyone the impression that these
boards just up and die (piano is over ten years old).
Thanks to all who have messaged on this topic!
--- In disklavier@yahoogroups.com, "midiacc2002" <BSchmidt@...> wrote:
>
> For me removing of the board was not complicate. This depends on
your
> own personally experience with such things. To remove the board you
> only have to loose appr. 20 screws, two connectors and some cable
> binder (I don't know the right word). Repairing of the corroded
solder
> strip was a little challenging cause of the very small dimensions.
>
>
> Bernhard
>
>
>
> --- In disklavier@yahoogroups.com, "yadidisklavier"
> <yadidisklavier@> wrote:
> >
> > That is good news. One of the caps on my board is actually
> > disconnected from the board (hanging by one wire). My thoughts
was
> > that the solder joint broke during one of the shipments of this
pians
> > (I'm the third owner). Because its such a tight area to work
with
> > (soldering), I was thinking about removing the board carefully
and
> > bringing it to someone with the tools and experience.
> >
> > How did you find removing the board? Challenging?
> >
> > --- In disklavier@yahoogroups.com, "midiacc2002" <BSchmidt@>
wrote:
> > >
> > > Hello yadidisklavier,
> > >
> > > good news: Today I could repair the LC-Display of my MX100II
> > > successfully. I just used our disklavier for recording my
daughter's
> > > piano piece "Brasilian flair".
> > > Diagnose: One of the two caps (4,7 uF , small black cube) was
bad
> > and
> > > so chemical agressive liquid run out. So a conductive strip was
> > > corroded and the result was a gap in the strip.
> > > I bridged the gap and replaced the two caps.
> > >
> > > Maybe your display has the same defect. To check this you only
have
> > to
> > > bend the two caps in order to can see the stips. Then use a
> > magnifying
> > > glass to check them.
> > > You can also measure whether strips are broken.
> > > If you have an expert for electronics he can do that for you.
> > >
> > > I hope I could give you a hint.
> > >
> > > btw: Electrolyt caps often fails because of run out liquid or
dry
> > out.
> > > That's a known problem. After 20 years of lifetime all
electrolyt
> > caps
> > > could be checked and replaced as a precaution if wanted.
> > >
> > > Bernhard
> > >
> > > St. Gallen / Switzerland
> > >
> > > --- In disklavier@yahoogroups.com, "yadidisklavier"
> > > <yadidisklavier@> wrote:
> > > >
> > > > Thanks for the head up. I'm guessing I would have figured
that
> > out
> > > > when I looked closer. Nonetheless, thanks.
> > > >
> > > > Heres the rest of my story: The tech called me yesterday and
> > told me
> > > > that Yamaha said these displays are on back order until June
> > 2007.
> > > > They've had a rash of replacements recently! And "it seems
that
> > > > these are subjected to age failure". $260 plus $100 labor,
on
> > top of
> > > > the $75 labor (already paid) to diagnose. Jeez, at least I
have
> > time
> > > > to budget for it.
> > > >
> > >
> >
>
________________________________________________________________________
AOL now offers free email to everyone. Find out more about what's free from AOL at AOL.com.Message
Re: [disklavier] Re: MX100 II Main LCD Display Problem and Solution
2007-04-05 by n9544c@aol.com
Attachments
- No local attachments were found for this message.