The screws I tightened are the ones that allow the wood blocks to turn to keep the front top cover in place(the cover that the tuner takes off to tune the piano). There are a couple washers between the head of the screw and the wood block and the washers were rattling because the screw wasn't screwed in enough. The note that caused the rattle was somewhere in the octave above middle C.
Hope this helps.
Maybe someone else on the group might have other suggestions?
Jared
On Jun 9, 2007, at 11:14 PM, Wandamusic@...m wrote:
In a message dated 6/9/2007 10:08:49 P.M. Eastern Daylight Time, jaredj74@... writes:but I looked inside and a couple of the screws that are used on the locks to hold the front in place were loose.where are they?They did tighten all screws under the lid. First they thought it was the wires in the back. But that did not seem to be the problem,Do you recall which notes rattled? In my case it is just one note but it is a note I use all the time in every song!I discovered yesterday that it got louder when I put something a bit heavy (a software box - like a stack of 7 - 8 books maybe) on the lid - it was the worst it ever was, and got better when I took it off.So I am thinking it may have something to do with the lid somehow!I live in the Phila PA area - was just wondering what par of the country you are from. I got mine from Jacbos music.Blessings,
WandaSee what's free at AOL.com.