Disklavier

Please change my e-mail address to chw@...  ( from chw@...
before). Thanks. C.H. Wu

 

________________________________

From: disklavier@yahoogroups.com [mailto:disklavier@yahoogroups.com] On
Behalf Of George F. Litterst
Sent: Wednesday, June 11, 2008 9:11 AM
To: disklavier@yahoogroups.com
Subject: UMR address - Re: [disklavier] Re: Need Help with M-Audio
MidAir to Disklavier III - Wireless Midi

 

Good morning, everyone.

 

I don't own this device, but I did take a look at it on the web. It
seems to me that you need to do the following:

 

--connect a USB MIDI interface to your computer

--using MIDI cables, connect MIDI Out from your interface to MIDI In on
the MidAir transmitter

--using MIDI cables, connect MIDI Out from the MidAir receiver to MIDI
In on the Disklavier

 

Naturally, you'll have to configure your computer properly to
communicate with the MIDI interface, and you'll have to configure your
Disklavier appropriately as well.

 

Regards,

PianoBench

 

 

On Jun 11, 2008, at 9:01 AM, ssikes65 wrote:





Correction. I meant Wireless Transmitter (not transceiver) is 
connected to Disklavier and Receiver with USB connected to 
Disklavier. I need Transmitter for computer to Receiver on 
Disklavier solution.

--- In disklavier@yahoogroups.com <mailto:disklavier%40yahoogroups.com>
, "ssikes65" <ssikes@...> wrote:
>
> I'm hoping somebody here is already using this specific solution 
and 
> can point me in the right direction. M-Audio's helpdesk could not.
> 
> I am trying to get Wireless Midi from my computer to my Disklavier 
III 
> so as to send .mid files to my Disklaver. The way MidAir is set up 
is 
> that the Receiver has the USB connection while the Transceiver does 
> not. So, their solution is meant to go opposite direction which is 
> from Piano to the computer. 
> 
> Has anybody run into this situation and found a graceful 
workaround? 
> 
> Thanks in advance.
>

 

=