Disklavier

From: disklavier@yahoogroups.com [mailto:disklavier@yahoogroups.com] On
Behalf Of Terry Fein
Sent: Saturday, May 17, 2008 4:41 PM
To: disklavier@yahoogroups.com
Subject: [disklavier] WIDI vs. Midair




I have been using two pairs of the M-Audio Midair to connect a DCD1 to a
Disklavier controller.  (The DCD1 is connected to my stereo on the other
side of the room.).  The Midair devices (or at least one of them) have quit
on me.  After checking various possibilities, I have concluded that I will
likely need to replace one or both pairs.
 
All of this leads to my question.  For my set-up, if I got the WIDI instead
of the Midair, would I need only one pair, or would I have to get two?  A
wired system would require two MIDI cables.
 
 
Terry Fein
Key Biscayne, Florida

----- Original Message -----

From: Phil Becker

To: disklavier@yahoogroups.com

Sent: Saturday, May 17, 2008 8:37 PM

Subject: RE: [disklavier] WIDI vs. Midair

With the WIDI you should only need a single pair - it is a full duplex MIDI wireless.

From: disklavier@yahoogroups.com [mailto:disklavier@yahoogroups.com] On
Behalf Of Terry Fein
Sent: Saturday, May 17, 2008 7:10 PM
To: disklavier@yahoogroups.com
Subject: Re: [disklavier] WIDI vs. Midair




Thanks.  How would it be hooked up?  Are there two MIDI connections on each
end--out and one in, to connect to the MIDI out and MIDI in on the
controller and on the DCD1?
 
Terry Fein

----- Original Message ----- 
From: Phil Becker <mailto:phil@...>  
To: disklavier@yahoogro <mailto:disklavier@yahoogroups.com> ups.com 
Sent: Saturday, May 17, 2008 8:37 PM
Subject: RE: [disklavier] WIDI vs. Midair

With the WIDI you should only need a single pair - it is a full duplex MIDI
wireless.