Yahoo Groups archive

Elektron Musical Instruments

Index last updated: 2026-04-28 23:22 UTC

Message

Re: [elektron] Re: Sliiiiide

2002-07-01 by Niklas Winde

Hi!

Thanks for the tips, I haven't had any time with my MD for a while now so I 
haven't had any chance to try any of the tips I've gotten... But I'll try it 
and report back to the list when I do. Altho if I have to go the portamento 
on/off way I'm smoked since AFAI can remember, the MCV4 does not have 
portamento -but I hope I have a bad memory :)

Thanks a lot anyway!
/Niklas W

Eelectric music:
http://learn.to/stryph
www.mp3.com/stryphworld


>Hi Niklas
>
>I think the problem is that the slide on the MD doesn't transmit via
>MIDI, it only works on parameter locks for internal MD sounds. So if
>you want a slide effect on your Mini, send it a portamento on/off
>message. This can be done by setting the MD midimachine up with a
>MIDI controller to switch the portamento on/off (usually #65?). Set
>the MCV4 up with the same controller number on its portamento on/off
>page (if it has inbuilt portamento. If not, it can't be done). Values
>from 0-63 will turn the portamento off, and 64-127 will turn it on.
>The porta-rate can be set in your MCV4 (I guess).
>
>I've done the same with a Korg MS-20 and a Kenton Pro-2000, and it
>worked fine! :)
>
>Good luck!
>
>Regards,
>Nils
>
>




_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.