Elektron Musical Instruments

i believe there was also talk of, if a knob were bumped while doing 
something else (and the knobs were set to 'coarse' adjustment when up 
and fine when pressed) then your parameters would become all kindsa 
messed up. 
i had initial thoughts about the knobs like you, s, but when i got to 
know the MD (doesn't take long!) i appreciated the way they are set 
up. 

best,
wendell.

conrexrecords.com/scutopus for all MD/SID tracks. i recommend 'flirt' 
if you have bandwidth. 


> "Pushing down often makes a few ticks before reaching the lower 
> lever, which would make it impossible to make fine adjustments 
> without making course adjustments first."
> 
> "The encoders have varied over time, I think you have got one with 
> heavier ones to turn. Now we have very light encoders."
> 
> "The encoders usually looses up some over time, but not very much. 
> It's not possible to make them looser by force, it is controlled 
> inside the knobs from factory."
> 
> if i understand it right, the problem is that the parameter would 
> jump a little before it can be adjusted finely. to me, in the 
> studio, this wouldn t be a problem. for live use i see the 
> inconvenience. so wouldn t it still be possible to have a setting 
in 
> wich to switch it? eg. switching between studio and live use.
> 
> 
> greets, d 


> > This is not going to happen, Daniel explained this already.
> > If you do this it will be impossible to do subtle adjustments.
> > Look it up in the archive for the complete story.
> > 
> > Ronald.