Yahoo Groups archive

Elektron Musical Instruments

Index last updated: 2026-04-28 23:22 UTC

Message

Re: [elektron] noise out the MD main outs when sending midi clock

2004-04-26 by Joe

On Mon, Apr 26, 2004 at 02:21:33PM -0500, Christopher Mitchell wrote:
> actually, it is happening only when a midi cable is plugged into the  
> output to an input whether the receiving end is turned on or not.  both  
> devices are currently plugged into the same power strip and being  
> ground lifted.  having read other users' reports of noise and radio  
> interference I was hoping for the best, but rather than take this out  
> of the country with me I think it may have to go back up for sale.

yuk!  I don't think that it will help, but maybe you should try doing a
soft reset?  I would contact Elektron about this if that doesn't help.
it sounds more like a hardware issue than a software one, though.

good luck!
Joe

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.