Elektron Musical Instruments

Hello

I've made patterns into my monomachine and i would like to get them 
into logic ,but when i'm playing the pattern on the mono ,logic 
receives no signal ! 
On the other hand when i use the mono keyboard signal appears in 
logic !!

Maybe it should be a thing in the mono menus i should turn on ?

I have been achieving this communication between MM and Logic. Have you added a Multi 
instrument to the logic environment.
 

--- In elektron-users@yahoogroups.com, "johnvager55" <johnvager55@y...> wrote:

> Hello
> 
> I've made patterns into my monomachine and i would like to get them 
> into logic ,but when i'm playing the pattern on the mono ,logic 
> receives no signal ! 
> On the other hand when i use the mono keyboard signal appears in 
> logic !!
> 
> Maybe it should be a thing in the mono menus i should turn on ?

Yes i did i've created a 6 track multi instrument 




--- In elektron-users@yahoogroups.com, "monofever" <monofever@y...> 
wrote:
> I have been achieving this communication between MM and Logic. 
Have you added a Multi 
> instrument to the logic environment.
>  
> 
> --- In elektron-users@yahoogroups.com, "johnvager55" 
<johnvager55@y...> wrote:
> > Hello
> > 
> > I've made patterns into my monomachine and i would like to get 
them 

> > into logic ,but when i'm playing the pattern on the mono ,logic 
> > receives no signal ! 
> > On the other hand when i use the mono keyboard signal appears in 
> > logic !!
> > 
> > Maybe it should be a thing in the mono menus i should turn on ?

you may have to create 6 mono instruments in logic..  sounds stupid 
i know but this is the only way i've gotten clavia gear to work 
properly in logic

i had to put each NL2X part on its own channel and treat it as 4 
mono instruments in the logic environment..

--- In elektron-users@yahoogroups.com, "johnvager55" 
<johnvager55@y...> wrote:
> Yes i did i've created a 6 track multi instrument 
> 
> 
> 
> 
> --- In elektron-users@yahoogroups.com, "monofever" 
<monofever@y...> 
> wrote:
> > I have been achieving this communication between MM and Logic. 
> Have you added a Multi 
> > instrument to the logic environment.
> >  
> > 
> > --- In elektron-users@yahoogroups.com, "johnvager55" 
> <johnvager55@y...> wrote:
> > > Hello
> > > 
> > > I've made patterns into my monomachine and i would like to get 
> them 
> > > into logic ,but when i'm playing the pattern on the 
mono ,logic 
> > > receives no signal ! 
> > > On the other hand when i use the mono keyboard signal appears 
in 

> > > logic !!
> > > 
> > > Maybe it should be a thing in the mono menus i should turn on ?

I have managed it this way:-

Use Audio Midi Setup and add the Monomachine, when you open logic there should be a 
matching Multiinstrument with 16 channels. In the arrange page create 6 new tracks and 
then select the multiinstrument tracks 1 - 6 on each track.

If you wish to record the midi messages from the monomachine you will need to record 
enable the 6 basic tracks, I usually record 7 as I wish to have the multitrig joystick data. 
You can 'demerge multiple midi recordings' (look in recording options). Once you have 
recorded you should have seven tracks of midi data, which if you play it back through the 
monomachine will sound similar to the original depending on your use of paramenter 
locks and other data that is not transmitted by midi.

The record enable button switches on midi thru for each track. Hope you have solved it 
already.



--- In elektron-users@yahoogroups.com, "dayjob111" <dayjob111@y...> wrote:

> you may have to create 6 mono instruments in logic..  sounds stupid 
> i know but this is the only way i've gotten clavia gear to work 
> properly in logic
> 
> i had to put each NL2X part on its own channel and treat it as 4 
> mono instruments in the logic environment..
> 
> --- In elektron-users@yahoogroups.com, "johnvager55" 
> <johnvager55@y...> wrote:
> > Yes i did i've created a 6 track multi instrument 
> > 
> > 
> > 
> > 
> > --- In elektron-users@yahoogroups.com, "monofever" 
> <monofever@y...> 
> > wrote:
> > > I have been achieving this communication between MM and Logic. 
> > Have you added a Multi 
> > > instrument to the logic environment.
> > >  
> > > 
> > > --- In elektron-users@yahoogroups.com, "johnvager55" 
> > <johnvager55@y...> wrote:
> > > > Hello
> > > > 
> > > > I've made patterns into my monomachine and i would like to get 
> > them 
> > > > into logic ,but when i'm playing the pattern on the 
> mono ,logic 
> > > > receives no signal ! 
> > > > On the other hand when i use the mono keyboard signal appears 
> in 
> > > > logic !!
> > > > 
> > > > Maybe it should be a thing in the mono menus i should turn on ?

Thank you very much for your support ,it worked out well !!!
The thing was to select the unmerge option in the record 
options ,well done !!

THX again

John





--- In elektron-users@yahoogroups.com, "monofever" <monofever@y...> 
wrote:
> I have managed it this way:-
> 
> Use Audio Midi Setup and add the Monomachine, when you open logic 
there should be a 
> matching Multiinstrument with 16 channels. In the arrange page 
create 6 new tracks and 
> then select the multiinstrument tracks 1 - 6 on each track.
> 
> If you wish to record the midi messages from the monomachine you 
will need to record 
> enable the 6 basic tracks, I usually record 7 as I wish to have 
the multitrig joystick data. 
> You can 'demerge multiple midi recordings' (look in recording 
options). Once you have 
> recorded you should have seven tracks of midi data, which if you 
play it back through the 
> monomachine will sound similar to the original depending on your 
use of paramenter 
> locks and other data that is not transmitted by midi.
> 
> The record enable button switches on midi thru for each track. 
Hope you have solved it 
> already.
> 
> 
> 
> --- In elektron-users@yahoogroups.com, "dayjob111" 
<dayjob111@y...> wrote:
> > you may have to create 6 mono instruments in logic..  sounds 
stupid 
> > i know but this is the only way i've gotten clavia gear to work 
> > properly in logic
> > 
> > i had to put each NL2X part on its own channel and treat it as 4 
> > mono instruments in the logic environment..
> > 
> > --- In elektron-users@yahoogroups.com, "johnvager55" 
> > <johnvager55@y...> wrote:
> > > Yes i did i've created a 6 track multi instrument 
> > > 
> > > 
> > > 
> > > 
> > > --- In elektron-users@yahoogroups.com, "monofever" 
> > <monofever@y...> 
> > > wrote:
> > > > I have been achieving this communication between MM and 
Logic. 
> > > Have you added a Multi 
> > > > instrument to the logic environment.
> > > >  
> > > > 
> > > > --- In elektron-users@yahoogroups.com, "johnvager55" 
> > > <johnvager55@y...> wrote:
> > > > > Hello
> > > > > 
> > > > > I've made patterns into my monomachine and i would like to 
get 
> > > them 
> > > > > into logic ,but when i'm playing the pattern on the 
> > mono ,logic 
> > > > > receives no signal ! 
> > > > > On the other hand when i use the mono keyboard signal 
appears 
> > in 
> > > > > logic !!
> > > > > 
> > > > > Maybe it should be a thing in the mono menus i should turn 
on ?