Re: [elektron] Re: timecode
2003-04-01 by polyhex _
I had this problem with reaktor. Using the MD as master the clock it outputs rapidly fluctuates round the set tempo. In the end I had to set the MD as slave and let Reaktor be the master, I use the slaved MD in cubase SX without a problem...... >From: "endlessnessisticman" <endlessnessisticman@...> >Reply-To: elektron-users@yahoogroups.com >To: elektron-users@yahoogroups.com >Subject: [elektron] Re: timecode >Date: Tue, 01 Apr 2003 04:36:32 -0000 > >I noticed the timing difference with my MPC. It seems like you want >either the MD be the master clock or the Cubase. It seems like both >are the master clock and there is some confusion. Maybe you have to >put Cubase in a slave mode. I don't know much about Cubase and the >menus. Maybe turn that Sync CTRL In : ON to OFF. > >--- In elektron-users@yahoogroups.com, "oldmanfury" <erinys@s...> wrote: > > Greetings, > > > > Somebody out there must know how to set up the following: > > > > I have an MD song that I want to play and sync it up to Pro52 (VSTI) > > in Cubase VST. I have gotten the thing working pretty well, and am > > trying to iron out the final few bugs. Pressing play/stop on the MD > > starts up and stops Cubase (so Sync CTRL seems to work). > > > > I have set the elektron global sync as follows: > > Sync Tempo In : Internal > > Sync CTRL In : ON > > Sync Out : ON > > > > I checked in Midi-ox, and the MD is spitting out timecode, and Cubase > > does its best to sync to it, but the tempo fluctuates 100... 101... > > and watching the time value shows that it 'hiccups' and actually > > goes "backwards" in time. i.e. 00:00:42:03, 00:00:41:16, > > 00:00:44:20. This causes the VSTI to miss notes... and I'm not > > talking about little 32nd notes, I'm talking about 6 beat long pad > > notes. > > > > What I really need is for somebody who has gotten their box to drive > > Cubase to post the SYNC parameters. The MD manual is pretty useless > > for this... it says nothing about frame rates. > > > > Specifically, for the Sync source, "Midi timecode" seems the most > > likely choice. What is MMC? ASIO2.0/MMC? And Framerate - I guess > > this is for tape/video editing, but what is the setting for the MD? > > 24, 25, 24.97, 24.97dfs??? > > > > I have tried many combinations, but damnit, it keeps dropping notes. > > Processor power is not the issue here - I'm at 10%. The Midisport > > 4x4 might be a problem... but it seems to be doing what it should. > > > > Any help is much appreciated. > > > > -gerald > _________________________________________________________________ Surf together with new Shared Browsing http://join.msn.com/?page=features/browse&pgmarket=en-gb&XAPID=74&DI=1059