Elektron Musical Instruments

Hi there !

My MD (OS 1.12b) seems to have troubles with individual outs. Ie :
sometimes OUT C&D and OUT E&F are inverted during playing or editing.
For example : Kick is usually played trhu OUT C, when this bug occurs
kick is played thru OUT D and when I look into [GLOBAL] I must select
OUT D to have it played thru OUT C. Same thing for OUT E&F. Crazy !
I have been playing with this MD for 8 months without any bugs before.
Perhaps somebody have the same bug, or a solution ? (except turning
OFF then ON again)

Thanks
mike

--- vcagate <vcagate@...> wrote: 
---------------------------------
Kick is usually played trhu OUT C, when this bug
occurs
kick is played thru OUT D and when I look into
[GLOBAL] I must select
OUT D to have it played thru OUT C. Same thing for OUT
E&F. Crazy !
---------------------------------

I don't mean to be insulting here, but have you
checked your cabling to make sure that you don't have
the OUT pairs actually reversed in their patching to
your mixer? I only ask because I have made the same
mistake before - thinking I had an output-swapping
problem, when in fact it was my own reverse-wiring
that was the cause... again, no offense, just that
I've learned to always check the obvious things
first...

cheers,
kevin

______________________________________________________________________ 
Post your free ad now! http://personals.yahoo.ca

--- In elektron-users@yahoogroups.com, not known <spectralab1@y...> wrote:
> --- vcagate <vcagate@y...> wrote: 
> ---------------------------------
> Kick is usually played trhu OUT C, when this bug
> occurs
> kick is played thru OUT D and when I look into
> [GLOBAL] I must select
> OUT D to have it played thru OUT C. Same thing for OUT
> E&F. Crazy !
> ---------------------------------
> 
> I don't mean to be insulting here, but have you
> checked your cabling to make sure that you don't have
> the OUT pairs actually reversed in their patching to
> your mixer? I only ask because I have made the same
> mistake before - thinking I had an output-swapping
> problem, when in fact it was my own reverse-wiring
> that was the cause... again, no offense, just that
> I've learned to always check the obvious things
> first...

I don't feel insulted :-) but unfortunatly it is not the answer since
I only use one individual out (C) ... Thanks 

I found no way to reproduce this bug but it has been here three or
four times and seems to be linked to edit mode. Example : the kick
plays on out C, I select hihat for edit, I input a note for hihat and
the kick swaps suddenly on out D ...

BTW, I apologize for my bad syntax, I am french =)

________________________________________________________________ 
> Post your free ad now! http://personals.yahoo.ca

--- In elektron-users@yahoogroups.com, "vcagate" <vcagate@y...> wrote:
> Hi there !
> 
> My MD (OS 1.12b) seems to have troubles with individual outs. Ie :
> sometimes OUT C&D and OUT E&F are inverted during playing or editing.
> For example : Kick is usually played trhu OUT C, when this bug occurs
> kick is played thru OUT D and when I look into [GLOBAL] I must select
> OUT D to have it played thru OUT C. Same thing for OUT E&F. Crazy !
> I have been playing with this MD for 8 months without any bugs before.
> Perhaps somebody have the same bug, or a solution ? (except turning
> OFF then ON again)
> 
> Thanks
> mike

What's about the panorama-settings?
Stefan

Appearently nobody else has had this problem.  My guess is that you
may have a defective unit and somehow the outputs are switched.  This
is what it seems like.

Are you saying that you can have the BD go out to C in Global, but
when you go to tweak another drum part the BD comes out at D(Does it
say D for BD in Global?)?

My suggestion is that you make sure it is not something you are
messing up.  I agree I make mistakes too and think it's a bug.  Get in
contact with Elektron.  

See if you can do a software reset also.  Don't forget to save your
patches.

--- In elektron-users@yahoogroups.com, "vcagate" <vcagate@y...> wrote:
> --- In elektron-users@yahoogroups.com, not known <spectralab1@y...>
wrote:

> > --- vcagate <vcagate@y...> wrote: 
> > ---------------------------------
> > Kick is usually played trhu OUT C, when this bug
> > occurs
> > kick is played thru OUT D and when I look into
> > [GLOBAL] I must select
> > OUT D to have it played thru OUT C. Same thing for OUT
> > E&F. Crazy !
> > ---------------------------------
> > 
> > I don't mean to be insulting here, but have you
> > checked your cabling to make sure that you don't have
> > the OUT pairs actually reversed in their patching to
> > your mixer? I only ask because I have made the same
> > mistake before - thinking I had an output-swapping
> > problem, when in fact it was my own reverse-wiring
> > that was the cause... again, no offense, just that
> > I've learned to always check the obvious things
> > first...
> 
> I don't feel insulted :-) but unfortunatly it is not the answer since
> I only use one individual out (C) ... Thanks 
> 
> I found no way to reproduce this bug but it has been here three or
> four times and seems to be linked to edit mode. Example : the kick
> plays on out C, I select hihat for edit, I input a note for hihat and
> the kick swaps suddenly on out D ...
> 
> BTW, I apologize for my bad syntax, I am french =)
> 
> ________________________________________________________________ 
> > Post your free ad now! http://personals.yahoo.ca

--- In elektron-users@yahoogroups.com, "endlessnessisticman"
<endlessnessisticman@y...> wrote:

> Are you saying that you can have the BD go out to C in Global, but
> when you go to tweak another drum part the BD comes out at D(Does it
> say D for BD in Global?)?

Well, sometimes BD goes out to D (but on the GLOBAL screen it says
'C'), when I change it to 'D' it goes out to 'C' ... I can live with
that, I suppose :-/

Thanks,

mike