Elektron Musical Instruments

I think that this may have been discussed but I can't find specific mention 
in the archives, and the manual is failing me on this simple issue. Any help 
will be greatly appreciated.

I have a pattern that I wish to transmit via MIDI to Cubase for additional 
layering of instruments.  Thus, I wish to record the MIDI output of each channel 
individually, in synchrony with the audio output.  I am using MIDI clock from 
Cubase SX2 to control Start and Stop of Monomachine.  
 
I cannot enable the Monomachine to transmit the MIDI data corresponding to 
the notes on any Track (Track 1, alone, for example) so that I can capture it in 
Cubase.
 
The manual seems to address this, but I can't get a MIDI out cable to carry 
any signal from the Monomachine.
 
I am sending MIDI clock into Monomachine (via my interface A), and am trying 
to send MIDI out from the Monomachine via a different cable and interface (my 
interface B) back to my computer.  Audio output is fine, just no MIDI out.
 
What am I overlooking?

Thanks,
A
 


[Non-text portions of this message have been removed]

On Jun 19, 2004, at 1:19 PM, allen949@... wrote:

>  What am I overlooking?

check out the global menu. under control out (1, I believe) you want
to set the sequencer to "int+ext" so that it will play internally and
export it's data as well.

hope that helps!
Joe


[Non-text portions of this message have been removed]

>  What am I overlooking?

check out the global menu. under control out (1, I believe) you want
to set the sequencer to "int+ext" so that it will play internally and
export it's data as well.

Thanks for your speedy response, but there is something else that I am 
missing.  My global setup was already playing internally and externally ("int+ext"). 
 I am sending MIDI clock out from Cubase, and so the Cubase controls start 
and stop the MM just as they should.  However, still, when I start the MM via 
Cubase (or even without Cubase), I can't get any data being sent via the MM's 
MIDI out cable.  I tried recording on channel 10 (which should be the 
transmssion channel) and then any channel, and channels 1-16 individually, but as far as 
I can tell, no MIDI signal is exiting from MM.

Is there a conflict with MIDI clock input?  Or (as I suspect) is there simply 
one more control that I haven't activated properly?  I have read the manual's 
discussion of MIDI a bunch of times and I can't find an answer.  I have also 
sent this question to elektron tech support, but so far I have not received an 
answer.  

Perhaps one of the other elektron machines has a manual that addresses this 
issue and will be relevant here.

Thank-you,
A


[Non-text portions of this message have been removed]

Hi !

I need to put a plug to a taiwanese power cord cable.
The colors are: black, white, green.

Anybody knows what color is the earth core ?


best
Flo

I don't know maybe Black.  But...  Don't they have a converter there
for foreign appliances?  I'd go with one of those.  Ask around.

--- In elektron-users@yahoogroups.com, Flo Zombie <newsgroups@z...> wrote:

> 
> Hi !
> 
> I need to put a plug to a taiwanese power cord cable.
> The colors are: black, white, green.
> 
> Anybody knows what color is the earth core ?
> 
> 
> best
> Flo