Dear Emax Group,
I have an Emax SE rack with late PC333 Rev A board (see pic 001) with E-chip
Rev B mounted on a daughter board (see pic 002).
A blue wire is (was) connected between this daughter board (pic 003) and the
mother board, from the R19 resistor external side (004).
This wire has been de-soldered from the daughter board but I don't know
where it was soldered (amongst the 4 most left pins nearby...).
I did not find any service manual or picture with this configuration (found
some with wire between E-chip pin 1 and 32, but no R19 resistor).
Can anyone help with a picture or schematics ?
Many thanks,
Eric
---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
https://www.avast.com/antivirus
[Non-text portions of this message have been removed]
Message
Re: [emax] Emax SE rack needs help - lost blue wire to the E-chip
2015-08-31 by Ted Summers
Eric-
you can't send pics directly to the group.
If you post the links somewhere (hosting, instagram, etc), then send us the links we can review the pics....
I believe you are talking about a wire for voltage regulation of the E-chip- but again- would have to see the pics to confirm it.
-T
Co-Moderator
On Mon, Aug 31, 2015 at 1:32 PM, 'synthwalker' synthwalker@... [emax] <emax@yahoogroups.com> wrote: