Yahoo Groups archive

Emax

Index last updated: 2026-04-28 23:23 UTC

Message

Re: [emax] Re: Depeche Mode

2004-03-14 by mishon66@...

I have done "strange love" "stripped" and "behind the wheel" and several other's...most recently "in your room" with in your room I too mixed the live version from the Paris show (sort of acoustic style) with the album cut. I also found adding a slight dance feel to the tracks is easy and goes along way, but I found working with these tracks was an lesson in itself. I used every sequencing skill and learned many new things along the way. The closer you listen the more you will find and the more programming and custom work you will do on the Emax...and the SD1.   For me it became a challenge and a learning tool at the same time.

Richard 


In a message dated 3/13/2004 9:46:21 PM Eastern Standard Time, emaxjs@... writes:

> Over the years I have done quite a few DM covers, from a version of "Just Can't Get 
> Enough" that combines the live version with elements of the 12" and 7" versions. To a 
> version of "Behind the Wheel" that stuck to the album version, but had more dance 
> oriented drum programming. The BTW cover dates back to being sequenced on my 
> Commodore 64 (1988) with the drum programming done in my old RX-11. "Just Can't 
> Get Enough" was done in Cakewalk 5 (1998) and is heavely reliant on my ESI-32 since I 
> had to make a lot of custom samples of things like perfectly times Portamento sweeps. 
> Actually my favorite cover of the hundred I've done is the 12" version of "Situation" by 
> Yazoo. It's pretty much note for note and sound for sound which made pushing the ESi-
> 32 and Emax II filters to recreate most of those analog sounds including the reverse 
> noise gates and the cool filtered arpreggio. If I have time I'll make MP3 recordings of 
> them (minus vocals) and post them for everyone to here what 
> I was able to achieve.

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.