Emax

The PLUS OS worked for me with the SE functions still there and the  
external ZIP working 2. Thanks for the help!!

Ted

On Apr 14, 2006, at 3:14 AM, esynthesist wrote:

> Hi Ted, as far as I understood an EMAX SE HD can only have an external
> SCSI port after an upgrade. So your machine clearly has been  
> upgraded :-
> )
> Now the original EMAX SE HD operating system (the one you probably  
> use)
> does not support the transposition of the SCSI ID, as the internal  
> scsi
> hd was fixed to ID 0 in the original EMAX SE HD.
>
> The SCSI upgrade contained a special SCSI software disk which enables
> you to select the SCSI ID.
> But I think you can also use the EMAX OS PLUS operating system.  
> This OS
> supports SE and also supports internal/external SCSI hd's. The OS can
> be downloaded of course from
> http://www.emulatorarchive.com/Samplers/EmaxOverview/EmaxOS/ 
> emaxos.html
>
> Just format a disk in you EMAX and put the Plus OS on it by using EMX
> or EMXP.
>
> Hope this helps...
>
> ///E-Synthesist
>
> --- In emax@yahoogroups.com, "ted Summers" <djtbs1@...> wrote:
>>
>> So, I have an internal HD. ID is set to whatever the factory setting
>> is (0 I believe). Emax will boot from it. OS version says Emax SE HD
>> 1.1. Have a floppy with this os ver too and can boot from it as well
>>
>> Just got a Zip100 Plus (SCSI Autodetect). Hooked to external port.
>> Whenever I try to use the transpose to choose ID 5 (or 6- the two ID
>> options that the Zip100 has), The Emax never gives me a SCSI ID
>> choice. Nor is there (after selecting Special) a 0 choice (and if I
>> hit 0 I get nothing). Any ideas?
>>
>> Thanks,
>> Ted
>>
>
>
>
>
>
>
>
> Emax and Emax II User's Group Website
>
> http://www.silveriafamily.com
> Yahoo! Groups Links
>
>
>
>
>
>
>
>