Emax

Actually, I decided to go ahead, and I installed DOS 6.22 onto an old
box I had kicking around.

Ran the software, created the disk, but when I run the disk I first
get the message 'BAD BANKS' and then 'WRONG SOFTWARE'. Anyone else
ever experience this? I took the SE software off of the Files section
on this group.

- Peter

--- In emax@yahoogroups.com, "elmacaco" <elmacaco@...> wrote:
>
> I can make you an SE upgrade disk, if you like,  it's $25 for the
trouble.
> 
> The good news then is you can run the Plus OS and have all the Emax
features.
> 
> 
>   ----- Original Message ----- 
>   From: peter_vh01 
>   To: emax@yahoogroups.com 
>   Sent: Sunday, May 28, 2006 12:18 PM
>   Subject: [emax] Re: Using the EMAX-1 Arpeggiator to control other
Synths...
> 
> 
>   Ah, no according to this site,
>   http://www.silveriafamily.com/emax/emax_overview.html HD 1.1 came out
>   before the SE.
> 
>   I don't really feel like going through the effort of setting up a DOS
>   machine with a FAT drive to get an SE install disk. Is it truly not
>   possible to send arpeggiated sequences through the midi out with the
>   version I am running? Or perhaps it's just a setting somewhere I need
>   to adjust?
> 
>   - peter
> 
>   --- In emax@yahoogroups.com, "peter_vh01" <petervh@> wrote:
>   >
>   > OK,
>   > 
>   > So how can I find out if my EMAX has the SE revision on it?
According
>   > to what it says under Master --> Special, my HD has the version
"Emax
>   > HD Rev. 1.1" installed. Is this the SE version? According to some
>   > websites I was looking at, it should say "Emax SE HD Rev
1.1"..perhaps
>   > there just wasn't enough space on the display to include the SE?
>   > 
>   > - Peter
>   > 
>   > --- In emax@yahoogroups.com, "rascalrevenge" <rascalrevenge@> wrote:
>   > >
>   > > Err, great find then for me and you´re right, just tried it,
works on
>   > > both my Emax´ with SE and Plus Software, honestly I can´t remind
>   > > reading that this was obviously changed with these
software-versions,
>   > >  "shocking" news ;-), I never tried this with them until A
MOMENT AGO,
>   > > just because I am sure on Emax 1 Software version 3.2 this did NOT
>   > > work, right ? If anyone can please confirm. In MASTER menu >
Special >
>   > > MIDI Analyzer > MIDI Data: Out I could now see the arpeggiated
notes
>   > > running, so on my old non SE- Emax in the same menu you could
only see
>   > > the note transmitted you pushed if I remember correctly, but
not the
>   > > arpeggiated notes (inbetween). Let me know someone with OS 3.2
if I´m
>   > > right then it´s working only on SE and Plus OS, and thx again
for that
>   > > info.  
>   > > 
>   > > RR  
>   > > 
>   > > 
>   > > 
>   > > 
>   > > 
>   > > 
>   > > 
>   > > 
>   > > 
>   > > 
>   > > 
>   > > 
>   > > --- In emax@yahoogroups.com, "Simon_Owen" <iss049@> wrote:
>   > > >
>   > > > err, that's odd then, becuase i'm using my emax as a master
>   > > controller (via atari ST 
>   > > > cubase) to record arpeggiated lines to my microkorg & jx3p
without
>   > > any problem.  Cubase 
>   > > > records all arpeggiated notes with no problem and plays them
back. 
>   > > Also works if directly 
>   > > > connected to external synth....  It does send arpeggiator to
>   midi out.
>   > > > 
>   > > > Cheers
>   > > > 
>   > > > Simon
>   > > > 
>   > > > 
>   > > > 
>   > > > --- In emax@yahoogroups.com, "rascalrevenge"
<rascalrevenge@> wrote:
>   > > > >
>   > > > > No, if doing so you´d still need to have the arpeggiator
turned
>   > on and
>   > > > > running into the same problem, the damn arp. just doesn´t
transmit
>   > > > > arpeggiated notes out, not even internal, whoever made that
>   > decission
>   > > > > @ E-mu back then.... &%$§"!. 
>   > > > > 
>   > > > > My Yamaha AN1x has a great Arpeggiator and Pattern Seq. and
>   > transmits
>   > > > > over MIDI, even on an independent MIDI Channel.
>   > > > > 
>   > > > > RR
>   > > > > 
>   > > > > 
>   > > > > 
>   > > > > 
>   > > > > 
>   > > > > 
>   > > > > --- In emax@yahoogroups.com, "peter_vh01" <petervh@> wrote:
>   > > > > >
>   > > > > > Hmm, just a thought, might it be possible to record an
>   arpeggiated
>   > > > > > sequence with the sequencer, and play that back through
the midi
>   > > port?
>   > > > > > 
>   > > > > > - Peter
>   > > > > > 
>   > > > > > --- In emax@yahoogroups.com, "peter_vh01" <petervh@> wrote:
>   > > > > > >
>   > > > > > > Gah! So there is no possible way to use the Emax
Arpeggiator
>   > > to drive
>   > > > > > > other gear? What a shame!
>   > > > > > > 
>   > > > > > > Anybody know of any affordable midi modules out there
that can
>   > > do a
>   > > > > > > good job of this?
>   > > > > > > 
>   > > > > > > - Peter
>   > > > > > > 
>   > > > > > > --- In emax@yahoogroups.com, "rascalrevenge"
<rascalrevenge@>
>   > > wrote:
>   > > > > > > >
>   > > > > > > > Sadly Emax does NOT transmit arpeggiator-data to
it´s MIDI
>   > OUT. 
>   > > > > > > > 
>   > > > > > > > RR
>   > > > > > > > 
>   > > > > > > > 
>   > > > > > > > 
>   > > > > > > > 
>   > > > > > > > 
>   > > > > > > > 
>   > > > > > > > 
>   > > > > > > > --- In emax@yahoogroups.com, "peter_vh01" <petervh@>
wrote:
>   > > > > > > > >
>   > > > > > > > > Hey guys,
>   > > > > > > > > 
>   > > > > > > > > I'm trying to figure out to use the arpeggiator on my
>   > > Emax-1 to
>   > > > > > > > > control my Juno 106. Anybody know how to do this? I
>   was just
>   > > > > playing
>   > > > > > > > > with the arpeggiator today, and had it functioning
>   > wonderfully
>   > > > > > on the
>   > > > > > > > > Emax itself, just not sure how to control other
devices
>   > > with it.
>   > > > > > > > > 
>   > > > > > > > > Thanks!
>   > > > > > > > > 
>   > > > > > > > > - Peter
>   > > > > > > > >
>   > > > > > > >
>   > > > > > >
>   > > > > >
>   > > > >
>   > > >
>   > >
>   >
> 
> 
> 
> 
> 
> 
>   Emax and Emax II User's Group Website
> 
>   http://www.silveriafamily.com 
> 
> 
> 
>   SPONSORED LINKS Electronic instrument  Emax  Synthesizer music  
>         Electronic music  Music sampler  Electronic musical instrument  
> 
> 
>
------------------------------------------------------------------------------
>   YAHOO! GROUPS LINKS 
> 
>     a..  Visit your group "emax" on the web.
>       
>     b..  To unsubscribe from this group, send an email to:
>      emax-unsubscribe@yahoogroups.com
>       
>     c..  Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service. 
> 
> 
>
------------------------------------------------------------------------------
> 
> 
> 
> [Non-text portions of this message have been removed]
>