Emax

--- In emax@yahoogroups.com, Louis van Dompselaar <louis@...> wrote:
>
> >> have you got the term on the back of the zip drive to 1
> 
> Termination is on (that's what I said in my first post).
> 
> > and it will
> > only work on channel 5 with the terminator on if you dont have a
> > terminator on then the signal wont bounce back and you get an open
loop 
> 
> I've tried all IDs from 1 to 6 without any luck. If it boots from
> the HD, it only sees the HD.  If it boots from the ZIP, it only sees
> the ZIP.  It won't see both.  It's just as if it stops scanning after
> finding the first bootable scsi device.
> 
> By they way, this is a regular scsi ZIP (with all IDs available), not
> the crippled blue box with only two IDs.
>
On an Emax II the MASTER 9,6 combo helps determine what it is
searching for first, and the DRIVE SELECT with the DATA slider shows
you what devices are connected and where on the chain.