Emax

Hi group, All I can tell you that I found the program on one of the other sampler sites on the Synthzone.com about 6 months ago. I beleive other groups are using it to pass around Akai samples. I tried it and found it could make accurate Emax 1 & 2 disks even EIII disks. I don't beleive that it is compatable with EMX. If we are going to use the CopyQM all of the disk images are going to have to be converted to lets say a ".QM1" or a ".QM2". Personally I can tell you that CopyQM takes quite a long time to convert to and from disk to image and image to disk. I think it would be a monumental task to convert somebody's library. Somebody with a website will probably have to post them so that the group can access the files. I believe there is only 20 megabyte or so for files on the Yahoo Emax Group.


Skip 


----- Original Message ----- 
  From: Joel ELISE 
  To: emax@yahoogroups.com 
  Sent: Monday, March 04, 2002 1:49 AM
  Subject: [emax] Using COPYQM


  Hi group !

  Skip recently talked about COPYQM a little program I just downloaded from the
  files section of this group.
  I didn't see anyone mention the "compatibilty" with the EMX banks.
  Does anyone know if it's possible to use COPYQM to create an Emax disk from an
  EMX bank ???

  Thanx in advance :)

  Skip Spoula a écrit :

  > Objet: Re: [emax] Re: (Fwd) Unable to Post
  > Date: Thu, 28 Feb 2002 22:07:30 -0600
  > De: "Skip Spoula" <skiplay4@...>
  > Répondre-A: emax@yahoogroups.com
  > A: <emax@yahoogroups.com>
  > Références: <a5mib8+r141@...>
  >
  >   Recently I stumbeled onto a program for DOS with which I made a sucessful bootable copy of my Emax II 2.14 os disk. I'm sending you a copy of the shareware and the disk image of my Emax II 2.14 os to see if it will work on the your end. There is instructions included with the software. You will have to work in a DOS window. Unzip the file to a directory of your choice. I used the root directory. The command line syntax for copying the image file to floppy will be as follows:
  > COPYQM A: PLAYBACK=C:zd777 BIOS
  >
  > Watch the spacing
  > zd777 is my image of the zd777 EMAX disk with the Emax II 2.14 OS on it
  > BIOS is a command to the program.
  >
  > To make the disk image I used the following command line from the DOS prompt:
  >
  > COPYQM A: RECORD=C:zd777 BIOS
  > Again watch your spacing .
  > Both processes take quite a while to do but the results were well worth it to me.
  >
  > You will find a copy of the software in the files section of this group. You'll have to unzip the file then you will have to unzip Copyqm.zip.
  >
  > Lets see what happens!
  > Best of luck,
  > Skip

  --
  Joel

        Yahoo! Groups Sponsor 
              ADVERTISEMENT
             
       
       

  Emax and Emax II User's Group

  http://www.silveriafamily.com 

  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]