Emax

Alright everybody, I took the plunge... have at it.  I will upload the BIN to the files section.

EMAX II it came from:
Model 2213
SN: 01200659

Main Board: PC360 REV C
SN: 900428

Upgrade Board: PC357 REV B (fully loaded)

Hopefully someone can put this info to good use.  I have ordered a few 9346s and sockets.  I'd be glad to burn a few and send them out if someone needs them.

Everett

--- In emax@yahoogroups.com, "dwv1957" <dwv1957@...> wrote:
>
> That's only partially right, there are 3 versions of the 93C46
> 93C46A is 8 bit
> 93C46B is 16 bit
> 93C46C is selectable 8/16 bit, and is the only one that requires the ORG pin.
> the 93C46B is a direct replacement for the 93C06
> 
> Dave
> 
> 
> --- In emax@yahoogroups.com, "Julian" <jujulilianan@> wrote:
> >
> > oooh, I2C eeprom.
> > 
> > I just looked about and found the Atmel datasheet for their 93c46, and
> > an old microchip datasheet for their version of the 06/46. 
> > 
> > If this is newer atmel part is representative of other modern 93c46
> > parts, to make the 46 work in place of the 06 you might have to make a
> > change - pin 6 is now a memory organisation pin, and you'll need to pull
> > that to VCC in order to make this chip run in x16 memory organisation.
> > 
> > 
> > apart from that - reading and writing I2C eeprom is pretty trivial and
> > works in a standard way across all devices. if worst comes to worst you
> > can do it with a standard microcontroller dev board and some off the
> > shelf code.... 
> > 
> > -- 
> > http://bleepin.com
> > 
> > -- 
> > http://www.fastmail.fm - Same, same, but different...
> >
>