Emax

thats expensive i brought mine for £10 for 2
  ----- Original Message ----- 
  From: drifter7508 
  To: emax@yahoogroups.com 
  Sent: Sunday, January 17, 2010 7:02 PM
  Subject: [emax] Re: My Emax II wont find my new CF internal CARD READER


    
  Bought 4 of these cards:
  http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=380192997368&ssPageName=STRK:MEWNX:IT

  Hope they will do the trick! The seller states:
  "Low speed ,Compatible with old equipment"
  Always a good sign. ;-)

  I dont know how the term.power works in my Emax II.
  I got the "Turbo model" with 8 MB ram, SCSI HD installed,
  and external SCSI Interface on the back.

  What I can understand, the original SCSI HD installed
  doesn't have its termination ON.

  --- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
  >
  > never us transend cards they never work properly just buuy sandisk 512mb cards not ultra 
  > 
  > does the emax2 require termpower to work or does it provide it?
  > 
  > also i dont know if that scsi to cf drive works with the emax
  > 
  > i gave you a list of scsi to ide cards and cfcard drives that did work 
  > ----- Original Message ----- 
  > From: drifter7508 
  > To: emax@yahoogroups.com 
  > Sent: Sunday, January 17, 2010 11:38 AM
  > Subject: [emax] Re: My Emax II wont find my new CF internal CARD READER
  > 
  > 
  > 
  > Thx for the info Jammie!
  > So simply my CF card is not compatible.
  > Darn. I ordered this card a week ago. Guess this one is a no no also:
  > http://media.conrad.de/xl/4000_4999/4100/4110/4115/411560_BB_00_FB.EPS.jpg =P
  > 
  > What I can read out of the manual with a little google translation
  > my CF Reader only has options for setting SCSI ID 1-7
  > and for Termination ON/OFF (The CN2 PIN in the manual)
  > The termination is default set to ON.
  > 
  > I set it to SCSI ID 1 and Termination is on by default.
  > 
  > Any suggestions where I can buy a compatible CF card?
  > 
  > Best regards
  > drifter7508
  > 
  > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
  > >
  > > YOUR BIGGEST PROBLEM THERE IS you cant use the ultra cards they are to fast for the old samplers version 1 or 2 cards the ultra range are version 4 type cfcards
  > > 
  > > dont now if that card will work with the emax i know its spec to work with the old macs but not being able to read the pin options for setting the card 
  > > 
  > > usually there are pin options for setting hdmode or atapi mode 
  > > 
  > > atapi mode is for cdrom drives and zipdrives that are removable and so are hot swappable
  > > 
  > > on hd mode the cf cards are not hot swappable as the eide spec does not support it 
  > > 
  > > you also need to set it to master
  > > 
  > > you also need it to set to pio mode for the type 1 cards as seeing it is only 512mb as cards faster than this including the ultra range require dma mode and the older samplers only work on piomode like the pcmcia drive cards which only work on pio mode
  > > 
  > > you also need to set it to termpower on 
  > > 
  > > and you need to set the termination on aswell otherwise it wont bounce the signal back to the controller
  > > 
  > > 
  > > ----- Original Message ----- 
  > > From: drifter7508 
  > > To: emax@yahoogroups.com 
  > > Sent: Saturday, January 16, 2010 4:30 PM
  > > Subject: [emax] My Emax II wont find my new CF internal CARD READER
  > > 
  > > 
  > > 
  > > 
  > > I set my Card reader to SCSI ID 1.
  > > 
  > > Is my CF card not compatible?
  > > See the image below
  > > 
  > > IMAGE OF MY CARD READER INSTALLED (Yes I have connected
  > > the ground cable to the greeen on since this photo was taken)
  > > http://img17.imageshack.us/img17/5822/img0370jm.jpg
  > > 
  > > Manual for my SCSI CF CARD READER:
  > > http://www.artmix.com/pdffiles/CF_PM_Manual_102.pdf
  > > 
  > > 
  > > 
  > > 
  > > 
  > > 
  > > ----------------------------------------------------------
  > > 
  > > 
  > > 
  > > No virus found in this incoming message.
  > > Checked by AVG - www.avg.com 
  > > Version: 8.5.432 / Virus Database: 270.14.143/2624 - Release Date: 01/15/10 12:47:00
  > > 
  > > 
  > > [Non-text portions of this message have been removed]
  > >
  > 
  > 
  > 
  > 
  > 
  > 
  > ----------------------------------------------------------
  > 
  > 
  > 
  > No virus found in this incoming message.
  > Checked by AVG - www.avg.com 
  > Version: 8.5.432 / Virus Database: 270.14.145/2626 - Release Date: 01/16/10 07:35:00
  > 
  > 
  > [Non-text portions of this message have been removed]
  >



  


------------------------------------------------------------------------------



  No virus found in this incoming message.
  Checked by AVG - www.avg.com 
  Version: 8.5.432 / Virus Database: 270.14.147/2628 - Release Date: 01/17/10 07:35:00


[Non-text portions of this message have been removed]