Emax

I just checked the memory expansion instructions and you  are correct. The PALs that come installed in the memory expansion board do not need to be 
changed when expanding an Emax II with 2MB on the motherboard to 4MB, 6MB or 8MB. The PALs in the memory expansion kits only need to be 
swapped in when expanding an Emax II with 1MB on the motherboard.

/Tristan

On Thu, Nov 25th, 2010 at 12:40 AM, Louis van Dompselaar <louis@...> wrote:

> I think my question was more whether the board would use different PALs
> with 2MB and 8MB, I wasn't quite sure after reading the document, as it
> doesn't say anything about swapping PALs for 8MB, but it might have come
> with different ones in the first place...
> 
> My 2MB board does have PALs.
> 
> 
> Op 24 nov 2010, om 14:31 heeft tu@... het volgende
> geschreven:
> 
> > The 2MB memory expansion kits included both DRAMs and PALs, so I expect
> most expansion boards 
> > would not have the PALs already installed unless they have all the DRAM
> sockets filled. But it is 
> > possible some may. It is easy enough to check.
> > 
> > /Tristan
> > 
> > 
> > 
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
>