Emax

There are a few possibilities for this.. as Ted mentions, the scrambled megs 
problem is one possibility

I have also had this condition when the board or chips become unseated 
slightly.. I managed to cure this by removing the memory daughterboard and 
slightly lifting and re-seating the memory chips and then securely re-fitting 
the board.

I have also seen this condition when the PSU output levels drop, particularly 
the 5v level. 
It may be worth getting a re-cap kit for the PSU

hope this helps



Simon


________________________________
From: n_c630 <n_c630@...>
To: emax@yahoogroups.com
Sent: Wed, February 16, 2011 8:09:50 PM
Subject: [emax] emax memory issues

   
I have an emax 2 model 2213 that boots up to 1 meg but states that there is a 
memory issue.  The unit came with the 2meg memory expansion disk. Opening it up 
it does seem to have the memory daughter board.  Any reason that it may be only 
recognizing 1meg?  Is it possible the board was not installed properly? 


Thanks!


 


      

[Non-text portions of this message have been removed]