Emax

I think out might be wrong about the pedal not being a control voltage. The emax owners manual says,

"...eight possible control sources...4. Control voltage pedal (plugs into the rear panel PEDAL jack; also accepts and 0 to +10V control voltage source)"

and the diagnostics manual:

"To test and calibrate Emax's footpedal input, either a footpedal (voltage or resistance type; see Interface Specification), or a footpedal simulator is required...."



--- In emax@yahoogroups.com, "bertbong" <muetze@...> wrote:
>
> A "CV Pedal Input" is not a CV Control Voltage input!
> I don t think the emax will like to receive +/- 5 Volt there...
> 
> A standard CV Pedal is a "Trim Pot" !
> I once converted an old Analog Joystick by ripping out all the electronic except the trimpots to a "dual CV Pedal". It connects well to the CV Input of Synthesizers.