Emax

thanks jammie, 


actually i should have mentioned that i started to fit the slim floppy drive and card reader option a while back and the unit has not been used for a while. i did buy the scsi upgrade and fitted that into the board too.

i think i might be missing some software update for the new scsi set up though .as any of the discs that previously worked on the SE give either disc  error; timeout error, or disc not formatted messages, when one disc did start to load, the green sequencer light came on and an insert disc message appeared. after which the unit was unresponsive. 
so i'm a bit stuck at this point



________________________________
 From: jammie <jammie.emma@...>
To: emax@yahoogroups.com 
Sent: Friday, 11 May 2012, 22:33
Subject: Re: [emax] Emax 1 Repair
 

  
thats a bad floppy drive

it cant boot when the 2 led,s stay on

easy fix get a replacement floppy drive 

make sure yoou can get 1 with ds0 and ry signals as jumpers

what revision is the mother board 

if its a revision2/3 then you can upgrade it to scsi and fit a slim floppy drive with a slim floppy convertor

and a pcd-50b scsi to pcmcia cf card drive fast cheap and 32mb cards go for £3-5 each so its easy to make a big collection

my EII library is 800 floppy banks

you get 35 banks per cf card you would need 23 cf cards just for my EII collection and its growing as im adding new sample content daily

love the EII sound and the emax is close in sounding identical
----- Original Message ----- 
From: Bob King 
To: emax@yahoogroups.com 
Sent: Friday, May 11, 2012 8:54 PM
Subject: Re: [emax] Emax 1 Repair

It won't boot from the floppy disc. It starts with a diagnostics message then says loading software after which it hangs.. I can't get any of the buttons to respond either. The red light between Stop and Analog Processingstays on all the time.

________________________________
From: jammie <jammie.emma@blueyonder.co.uk>
To: emax@yahoogroups.com 
Sent: Friday, 11 May 2012, 21:44
Subject: Re: [emax] Emax 1 Repair

whats wrong with it
----- Original Message ----- 
From: Bob King 
To: emax@yahoogroups.com 
Sent: Friday, May 11, 2012 8:37 PM
Subject: [emax] Emax 1 Repair

Hi folks, is there anyone in the Berlin area that can repair an Emax 1?

Thanks in advance

Bob 

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]


 

[Non-text portions of this message have been removed]